Product Description
Trailblazer, Envoy and Bravada Stainless License Plate Bezel (LP42290)
LP42290 is listed for three SUVs, each on its own row and each tagged 4-door SUV, and the product title names all three: the Chevrolet Trailblazer for 2002 through 2009, the GMC Envoy for the same 2002 through 2009 span, and the Oldsmobile Bravada for 2002 through 2004 only. Note the shorter range on the Bravada row; a Bravada outside 2002 to 2004 isn't on the listing, even though the Trailblazer and Envoy rows run five years longer.
One bezel for three nameplates
LP42290 is a single License Plate Bezel, 26-gauge 304 stainless steel with a mirror polish, made in the USA. The catalog doesn't list dimensions or cutouts, and it doesn't describe any difference in fit between the three vehicles. So whichever one you own, compare the product photos with the area around your plate, paying attention to any lock, handle, emblem or lighting near it. If your SUV doesn't match the photos, or you're unsure which row it falls under, call Quality Automotive Trims at 877-752-3811 and give the SKU LP42290 along with your make, model and year.
Getting the surface ready
Every vehicle on these rows was built in 2009 or earlier, and the bezel bonds with tape, so the paint is where the job really starts. Pull the plate. Look for chips, chalky or lifting clear coat, and old adhesive from dealer frames or stickers. Touch up and repair what you find rather than taping over it, because the tape grips the top layer and nothing deeper. Scrape off residue with a plastic tool, wash, rinse, dry, and finish with a rubbing alcohol wipe.
Fitting
The Trailblazer bezel fixes directly over the existing surface with 3M automotive-grade acrylic foam tape, no drilling, so nothing on the plate area needs taking apart. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. With the liner still on, hold the bezel in position and judge it from a few steps back; once it's centered, a few strips of painter's tape will hold the reference. Peel the liner, line it up and press firmly around the whole frame. The Installation tab lists each step and the temperature range.
Checking which row you're on
Your records show the make, model and year. A Trailblazer or Envoy should read 2002 to 2009, a Bravada 2002 to 2004.
No other parts on this sheet
No companion parts are cross-listed on this listing. If you're looking for more trim for your Trailblazer, Envoy or Bravada, a phone call is the quickest way to find out what's available.
If you use a plate frame
Put it back on during the dry fit. You'll see right away whether it covers the bezel's edge, and you can decide which look you'd rather keep while the tape is still protected.
Polished stainless needs little more than mild soap and water to stay bright. Leave abrasive pads out of it.
LP42290 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP42290 |
| UPC | 691821676965 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2002-2009 Chevrolet Trailblazer, 2002-2009 GMC Envoy and 2002-2004 Oldsmobile Bravada |
Fitment: LP42290
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Trailblazer | 2002-2009 | 4-door, SUV |
| GMC Envoy | 2002-2009 | 4-door, SUV |
| Oldsmobile Bravada | 2002-2004 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP42290 License Plate Bezel
Does LP42290 fit the GMC Envoy?
Yes. The fitment data lists the 2002-2009 GMC Envoy 4-door SUV, along with the Trailblazer and the 2002-2004 Bravada.
Which Bravada years are covered?
2002 through 2004 only.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Are dimensions listed?
No. Use the photos or call 877-752-3811.
How many pieces?
One.
