Product Description
Lexus RX350 and RX450 2010-2015 Stainless License Plate Bezel (LP10125)
LP10125 is a one-piece polished stainless steel license plate bezel. A bezel is a frame-style trim for the area around the plate, as opposed to a bar that runs above it. The fitment data has two rows, the RX350 4-door SUV, 2010-2015, and the RX450 4-door SUV, 2010-2015, and the title on this listing names both. Either model from those years is covered; call Quality Automotive Trims at 877-752-3811 with the part number if you want it confirmed before ordering.
What it's made of
For the RX350 or RX450, the bezel is 26-gauge 304 stainless steel, polished to a mirror finish and made in the USA. It mounts with 3M automotive-grade acrylic foam tape over the existing surface, so nothing is drilled, and QAA says that tape will hold for a lifetime with no damage to the Lexus's surface.
What the listing doesn't cover
No width or opening size is given, and there's no note about a camera, lights or a handle near the plate. The product photos show the bezel's shape and how it sits, and they're the best reference. Compare them with the plate area of your RX before ordering.
Fitting a bezel
It's often easier to remove the plate while you work, so you can clean and see the whole area. Wash with soap and water, dry thoroughly, and wipe with rubbing alcohol, paying attention to corners and edges where grime collects. Hold the bezel in place with the liner on and check that it's centered and level from behind the vehicle. Mark a couple of reference points with painter's tape. Peel the liner, set the bezel against your marks, and press firmly all the way around. Press again a minute later, then refit the plate. Close the liftgate gently for the first day. The Installation tab lists the temperature range.
Bezel and rear accent
RD10125, on the same list, is a one-piece part cataloged as a Rear Deck Accent at 1.375". The catalog doesn't describe where it sits relative to the plate, so compare the two listings' photos if you want both.
More for the RX
GC10125 is a one-piece gas door cover trim. PP10125, PP10126, PP10127 and PP10128 are pillar post kits of four, six, eight and ten pieces; the ten-piece Includes front mirror piece. WQ10125 is a six-piece wheel well accent trim. Check each listing's own fitment rows, since this bezel lists both RX350 and RX450, and check its photos for finish.
Paint condition
On an RX from these years, the paint around the plate may have chips, worn clear coat or residue from a dealer frame or sticker. Inspect it in good light and fix problems first; tape bonds best to sound paint.
Why a bezel
A plate sits in a recessed or flat area that tends to look plain. A polished frame around it outlines that space with one clean piece of metal, and it doesn't change anything else on the liftgate.
Care
Mild soap, water and a soft towel. Avoid abrasive pads and gritty compounds.
LP10125 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP10125 |
| UPC | 691821644384 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2015 Lexus RX350 and 2010-2015 Lexus RX450 |
Fitment: LP10125
| Vehicle | Years | Body style |
|---|---|---|
| Lexus RX350 | 2010-2015 | 4-door, SUV |
| Lexus RX450 | 2010-2015 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Lexus RX350
- GC10125: 1-piece Gas Door Cover Trim
- PP10125: 4-piece Pillar Post Trim
- PP10126: 6-piece Pillar Post Trim
- PP10127: 8-piece Pillar Post Trim
- PP10128: 10-piece Pillar Post Trim
- RD10125: 1-piece Rear Deck Accent
- WQ10125: 6-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP10125 License Plate Bezel
Does LP10125 fit the RX450?
Yes. The RX450, 2010-2015, sits beside the RX350 in both the fitment rows and the title. Call 877-752-3811 to confirm if you need to.
What is a license plate bezel?
A frame-style trim for the area around the plate.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
Is a size listed?
No. See the photos.
