Product Description
PP10126: 6-Piece Stainless Pillar Post Trim for the 2010-2015 Lexus RX350 / RX450
Six polished stainless pieces for the pillars of a 2010-2015 Lexus RX, that's PP10126. The fitment rows list two models, the RX350 and the RX450, both for 2010 through 2015 and both tagged 4-door SUV, and the title names both. If you own either and want a second check, call Quality Automotive Trims at 877-752-3811 with PP10126 before you order.
Where it sits among the options. Pillar trim for these SUVs is listed in four sizes on this sheet: four pieces (PP10125), six (this set), eight (PP10127) and ten (PP10128, noted as including a front mirror piece). The record doesn't list the pillars each set covers, so the product photos are the way to compare. Look at the four-piece and eight-piece photos alongside these and decide how much coverage you want.
The material. 26 gauge 304 stainless steel, polished, made in the USA. No width or notes are listed.
The mounting. On the RX350, the six covers are held by 3M automotive-grade acrylic foam tape on the existing pillar surface; nothing is drilled and no Lexus trim comes off.
A sorting method for six. Put a towel on a table and lay the pieces out in the arrangement the photos show. Using the photos, place each piece in its row in front-to-back order. Hold each to its pillar with the liner on to make sure the shape matches, and write a short code on the liner. Once every piece has a code, you can work quickly without second-guessing.
Prep. Wash the pillars with soapy water and dry them. Wipe with rubbing alcohol and let it evaporate. Take any wax or sealant off the contact area. Check the finish for chips or peeling and repair those spots first.
Install. Start with a front piece on the RX350. Peel its liner, line it up with the pillar edges, and press firmly from one end to the other. Seat the edges with a fingertip. Continue toward the back, then step away and check before moving to the remaining pieces. When you're done, look over all six from a few steps away. Choose a dry day inside the temperature range in the Installation tab, and give the tape its listed cure time before the first wash.
Other parts listed. GC10125 is a 1-piece gas door cover trim. LP10125 is a 1-piece license plate bezel. RD10125 is a 1-piece rear deck accent at 1.375 inches for this SUV, sold on its own listing, so check its photos for its placement on the back of the SUV. WQ10125 is a 6-piece wheel well accent set. All are tagged 4-door SUV.
Light and weather. Bright sun reflecting off glass and polished steel makes small misalignments hard to see. Work in shade or a well-lit garage, and avoid cold, damp or very hot days so the tape gets a good start.
Care. Mild soap and water, a soft cloth to dry, and no abrasive pads or steel wool.
PP10126 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP10126 |
| UPC | 691821684168 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2015 Lexus RX350 and 2010-2015 Lexus RX450 |
Fitment: PP10126
| Vehicle | Years | Body style |
|---|---|---|
| Lexus RX350 | 2010-2015 | 4-door, SUV |
| Lexus RX450 | 2010-2015 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Lexus RX350
- GC10125: 1-piece Gas Door Cover Trim
- LP10125: 1-piece License Plate Bezel
- PP10125: 4-piece Pillar Post Trim
- PP10127: 8-piece Pillar Post Trim
- PP10128: 10-piece Pillar Post Trim
- RD10125: 1-piece Rear Deck Accent
- WQ10125: 6-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP10126 Pillar Post Trim
Which Lexus models does PP10126 list?
Both. The rows and the title cover the RX350 and RX450 for 2010-2015.
How many pieces?
Six.
How does it compare with the other pillar sets?
PP10125 has four, PP10127 eight, and PP10128 ten with a front mirror piece.
Is drilling needed?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What's it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
