Product Description
Ten-Piece Stainless Pillar Trim With Front Mirror Piece, Lexus RX 2010-2015 (PP10128)
PP10128 is the largest pillar trim set on this sheet for the 2010-2015 Lexus RX, and its note explains why it has more pieces than the others: "Includes front mirror piece." Ten polished stainless pieces in all, made in the USA from 26 gauge 304 stainless steel. The catalog doesn't spell out where each of the ten goes or what the mirror piece looks like, so before you buy, spend a minute with the product photos. They show the shape of every piece, including the one the note calls the front mirror piece.
The other pillar sets on this sheet are smaller. PP10125 has four pieces, PP10126 six, and PP10127 eight, and none of those three carries the mirror-piece note. If you want the mirror piece, this ten-piece set is the one that says so in writing.
On fitment, the rows list two models, the Lexus RX350 and the RX450, each from 2010 through 2015 and each tagged 4-door SUV, and the title names the same two. There is no trim note on either row. Whichever RX you have, check it's a 2010 to 2015, and if anything about your pillars looks different from the photos, call Quality Automotive Trims at 877-752-3811 with PP10128 before you order.
Mounting is 3M automotive-grade acrylic foam tape, installed directly over the existing surface, so the job involves no drilling and nothing comes off the vehicle. No width is listed for the set.
Ten pieces reward patience. Clear a table, lay down a towel, and arrange the ten pieces in the order the photos show them sitting from front to back. The mirror piece is a good place to start, since the note singles it out; find it in the photos, then find it in the box. Hold every piece to its spot on the SUV with the liner still on, and label each liner as it's confirmed. Each of the RX350's ten covers is polished stainless steel.
When everything is labeled, prepare the surfaces. Soapy water first, then a full dry, then a rubbing alcohol wipe that you let evaporate. Any wax or sealant has to come off where tape will touch, and a damaged or peeling finish should be repaired first, because the tape bonds to whatever surface is underneath it.
Install side by side. Peel each liner in turn, align the piece with its pillar's edges, and press firmly along its full length before sealing the edges with a fingertip. Look at the finished covers from several steps back every few pieces and compare. Work on a dry day inside the temperature range in the Installation tab, and wait the cure time it lists before washing.
The sheet also lists GC10125, a 1-piece gas door cover trim; LP10125, a 1-piece license plate bezel; RD10125, a 1-piece rear deck accent at 1.375 inches; and WQ10125, a 6-piece wheel well accent set.
Clean the stainless with mild soap, water and a soft cloth, never steel wool.
PP10128 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP10128 |
| UPC | 691821687336 |
| Part type | Pillar Post Trim |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Includes front mirror piece |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2015 Lexus RX350 and 2010-2015 Lexus RX450 |
Fitment: PP10128
| Vehicle | Years | Body style |
|---|---|---|
| Lexus RX350 | 2010-2015 | 4-door, SUV |
| Lexus RX450 | 2010-2015 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Lexus RX350
- GC10125: 1-piece Gas Door Cover Trim
- LP10125: 1-piece License Plate Bezel
- PP10125: 4-piece Pillar Post Trim
- PP10126: 6-piece Pillar Post Trim
- PP10127: 8-piece Pillar Post Trim
- RD10125: 1-piece Rear Deck Accent
- WQ10125: 6-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP10128 Pillar Post Trim
What makes PP10128 different from the smaller sets?
It has ten pieces and is noted as including a front mirror piece.
Does it fit the RX450?
Yes. The rows and the title list the RX350 & RX450, 2010-2015.
How many pieces?
Ten.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
Where does the mirror piece go?
The listing doesn't say. The photos show it, or call us.
