Product Description
1995-1996 Park Avenue Ultra Rocker Trim, Ten-Piece Full-Length Kit at 6" (TH35585)
TH35585 is the Ultra kit. Its fitment row reads "4-door, Sedan, Ultra" for the 1995-1996 Buick Park Avenue, and it's ten pieces of polished stainless steel, a Full Kit 6" wide. The notes: "Full Length, Includes coverage from the wheel well to the bumper on the front and rear" and "Spans from the bottom of the molding to the bottom of the door."
Ultra tag, single width
The linked TH35580 has no trim tag and a tapered 7"-7.5" width. This kit names the Ultra and lists one figure, 6", with no taper. The record doesn't say why the numbers differ. Your car settles it: measure from the bottom of the molding to the bottom of the door at the front, middle and rear of each door. A consistent reading near 6" supports this kit.
If the numbers don't line up
If your Park Avenue is an Ultra but measures closer to 7", or isn't an Ultra but measures 6", don't order on the tag alone. Call 877-752-3811 with the readings and a photo of the side.
Coverage
Full length means the steel runs from the front bumper back to the rear bumper, through the wheel-well areas and along the doors. The record doesn't break the ten pieces down by location. Use the photos and label every liner.
Material and tape
The full-length Park Avenue Ultra kit is ten 6" pieces that QAA forms in the USA out of polished 26 gauge 304 stainless, carried wheel well to bumper on 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime and won't mark the 1995-1996 Buick.
Preparing the whole side
Because coverage runs bumper to bumper, prep the whole lower side, not just the doors. Wash, dry, and wipe with isopropyl alcohol. Look at the lower edges near the wheel openings for chips and repair them first.
Molding check
Press along the molding from end to end. It sets the top line of every piece.
Sequence
- Dry-fit the door pieces first to establish the line.
- Fit the front and rear sections to meet them.
- Peel, press and smooth one piece at a time.
- Hold the same positions on every Park Avenue piece.
Fitting each piece
With the liner on, hold the piece against the car and check that it meets the molding at the top and the bottom edge below. Peel a few inches, press, and pull the liner gradually while smoothing toward the far end. Finish with firm palm pressure over every part.
Supplies
Gather soap, isopropyl alcohol, lint-free cloths, painter's tape, a marker, a tape measure and a plastic trim tool, and ask a second person to help with the Park Avenue.
Conditions
A dry, mild day in the shade, so the steel and paint are at a moderate temperature.
Care
Give the Park Avenue a day before washing; mild soap afterward.
End sections
Measure each end section's distance from its wheel opening and keep it consistent, so the car reads evenly.
Park Avenue set TH35585 (UPC 691821254248): call Quality Automotive Trims at 877-752-3811.
TH35585 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH35585 |
| UPC | 691821254248 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6" |
| Coverage / notes | Full Length, Includes coverage from the wheel well to the bumper on the front and rear; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1995-1996 Buick Park Avenue |
Fitment: TH35585
| Vehicle | Years | Body style |
|---|---|---|
| Buick Park Avenue | 1995-1996 | 4-door, Sedan, Ultra |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1995-1996 Buick Park Avenue
- TH35580: 10-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH35585 Rocker Panel Trim, Full Kit
Is TH35585 for the Ultra only?
It's tagged "4-door, Sedan, Ultra." The untagged Park Avenue kit is TH35580.
How tall?
6", from the bottom of the molding to the bottom of the door.
Is it full length?
Yes, with coverage from the wheel well to the bumper on the front and rear.
How many pieces?
Ten.
