Product Description
1993-1999 Silverado C/K 1500 Crew Cab Centurion Long Bed with Flares: 12-Piece Rocker Kit, 6.25" (TH32177)
TH32177 puts one condition on a familiar description: "w/ Flares." The fitment is the 1993-1999 Chevrolet Silverado, 4-door pickup, C/K 1500 Crew Cab Centurion, long bed, with flares. The kit is twelve pieces of polished stainless steel, 6.25" wide, a Full Kit that "Spans from the bottom of the molding to the bottom of the door."
Why the flares tag matters
The record ties this kit to trucks with flares, but it doesn't say how the flares change the pieces. If your truck has flares, this is the listing tagged for it; if it doesn't, call 877-752-3811 before ordering. Don't assume a flares kit and a non-flares kit are interchangeable.
Starting year
Fitment begins at 1993 and runs through 1999. If your truck is older, this record doesn't cover it.
No linked parts
This listing has nothing linked to it. QAA does catalog other Centurion rocker kits without a flares tag; ask us if you need help comparing them.
What you get
- Twelve pieces
- 6.25" width, molding to door bottom
- 26-gauge 304 stainless, polished, high grade
- Crew Cab Silverado trim built in the USA
- Goes over the truck's surface as it is with 3M automotive-grade acrylic foam tape
For the Centurion Crew Cab, QAA says the tape will hold for a lifetime without causing any damage to the truck's paint.
Check the area near each flare
During the dry-fit, look closely at the ends of the pieces nearest the wheel openings. They should meet the flares as shown in the photos, without pressing into them. If an end overlaps or leaves a gap you didn't expect, stop and call.
Prep
Wash, rinse, dry. Wipe the band with isopropyl alcohol until clean. Look for chips and flaking along the lower doors and fix them first.
Layout and labeling
Positions aren't listed. Lay out the pieces in order on a clean blanket, match them to the photos, and write a position on a strip of painter's tape on each liner. Twelve pieces get mixed up quickly once you start working, so take a phone photo of the layout too.
Supplies
Silverado Crew Cab supplies: soap, isopropyl alcohol, lint-free cloths, painter's tape, a long tape measure and a plastic tool for any residue.
Mounting
Set each top edge under the molding with the liner on. Peel, press, continue. Close each door slowly after its piece goes on.
Confirming your truck
Four details define this listing: Crew Cab Centurion, long bed, flares, and a 1993-1999 model year. Check each against your truck. If any one doesn't match, call 877-752-3811 before going further.
Molding first
The molding is the top reference. Press along it and fix any loose or wavy sections before mounting, or the steel will follow the fault.
Matching the gaps
Measure the gap from the molding at the front, middle and rear of each door as you go and keep them consistent.
Afterward
Mild, dry weather; a day before washing; non-abrasive polish.
Silverado Crew Cab kit TH32177, UPC 691821332014: call Quality Automotive Trims, 877-752-3811.
TH32177 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH32177 |
| UPC | 691821332014 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 12 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6.25" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-1999 Chevrolet Silverado |
Fitment: TH32177
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Silverado | 1993-1999 | 4-door, Pickup Truck, C/K 1500 Crew Cab Centurion, Long Bed, w/ Flares |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 12 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH32177 Rocker Panel Trim, Full Kit
Does TH32177 fit a truck without flares?
It's tagged w/ Flares. Call 877-752-3811 if your truck has none.
Does it fit an older Silverado?
The listing starts at 1993.
How many pieces?
Twelve.
How tall?
6.25", molding to door bottom.
