Product Description
2000-2005 Chevrolet Tahoe Upper Rocker Trim, Cut to Molding, 4 Pieces, 5.5" (TH40196)
TH40196 is a compact Tahoe kit: four pieces of polished stainless steel, a 5.5" Upper Kit for the 2000-2005 Chevrolet Tahoe four-door SUV. Two notes describe it, "cut to molding" and "Spans from the bottom of the molding DOWN to the specified width."
Four pieces on four doors
The count is low for an SUV kit, and no "Full Length" note appears. The record doesn't map the pieces, so the product photos are the guide to what they cover. Look at them closely before ordering.
"Cut to molding"
Not defined in the data. We'll quote it rather than interpret it. If the pieces don't match your molding, call 877-752-3811.
Year range
2000-2005. A Tahoe from outside those years isn't listed on this record.
No linked kits
The record stands alone. Other Tahoe rocker kits exist in QAA's catalog for overlapping years, with different counts and notes, but none is linked here. If you're comparing, ask us.
Five and a half inches
The band hangs that far below the molding. Paint underneath stays visible. A strip of painter's tape at that depth on one door shows the look.
The steel
The four 5.5" 2000-2005 Tahoe pieces are cut to the molding; QAA forms them in the USA out of polished 26 gauge 304 stainless steel and sets them below it with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime with no harm to the SUV.
Molding
Each piece tucks under it, and the "cut to molding" note ties the pieces to it as well. Make sure it's secure along all four doors.
Clean
Wash and dry under the molding, then wipe with isopropyl alcohol. Repair any chalky or peeling paint.
Fitting four pieces
- Match each to a door using the photos.
- Hold it with painter's tape and check the top edge against the molding.
- Lift a few inches of liner and fix the Tahoe piece's end.
- Press along, then firm pressure over the face.
Doors
Open each door fully afterward and check the edges.
Straight line
Front and rear door pieces should line up across the gap. Check before pressing the second.
Supplies
Tape measure, painter's tape, car soap, isopropyl alcohol and microfiber cloths.
Care
The Tahoe waits a day to be washed; mild soap after.
Choosing a short kit
A four-piece kit keeps the job small: fewer pieces to align, less surface to prepare. If you want steel beyond the doors, a call to 877-752-3811 can point you to fuller options for your Tahoe.
What to send
Year, a side photo showing the molding, and a close-up where the molding meets a door gap. Those help us explain how the pieces sit.
Weather
Fit the Tahoe trim on a dry, mild day in shade.
Confirming the year
The fitment ends at 2005. If your Tahoe is newer or you're not sure of the year, the door jamb sticker shows it; mention it when you call.
The four-piece Tahoe kit TH40196 has UPC 691821451890; questions go to 877-752-3811.
TH40196 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH40196 |
| UPC | 691821451890 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5.5" |
| Coverage / notes | Cut to molding; Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2000-2005 Chevrolet Tahoe |
Fitment: TH40196
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Tahoe | 2000-2005 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH40196 Rocker Panel Trim, Upper Kit
Which Tahoe is TH40196 for?
2000-2005 Chevrolet Tahoe 4-door SUV.
How many pieces?
Four.
How far down does it reach?
5.5" below the molding.
What does "cut to molding" mean?
The record doesn't explain it. Check the photos or call 877-752-3811.
