Product Description
2000-2005 Chevrolet Suburban Upper Rocker Kit, Cut to Molding, 4 Pieces, 5.5" (TH40199)
TH40199 is the smallest Suburban rocker kit in this run: four pieces of polished stainless steel, a 5.5" Upper Kit for the 2000-2005 Chevrolet Suburban four-door SUV. Its notes read "cut to molding" and "Spans from the bottom of the molding DOWN to the specified width."
Four pieces
No "Full Length" or wheel-well note appears on this record. The data doesn't say which panels the four pieces cover, so the product photos are the reference. If you want coverage beyond what they show, call 877-752-3811 and we'll talk through other Suburban listings.
"Cut to molding"
Undefined in the record. We quote it and leave the interpretation to the photos and to a phone call.
Years
2000 through 2005. The record doesn't list a Suburban outside those years.
Hanging from the molding
The top of each piece meets the molding and the steel reaches five and a half inches down. Paint beneath stays visible. A painter's tape preview on one door shows the look.
Material
The four 2000-2005 Suburban pieces are 5.5" strips cut to the molding from USA-made polished 26 gauge 304 stainless steel, fixed below it with 3M automotive-grade acrylic foam tape over the existing surface. QAA says the tape will hold for a lifetime without harming the Chevrolet SUV.
Not linked
No other SKUs are attached to this record.
Molding
Both notes depend on it. Press along it on every door and re-secure any loose section before starting.
Prep
Wash, rinse and dry below the molding, then an isopropyl alcohol wipe. Fix chalky or peeling paint in the band.
Fitting
- Use the photos to assign each piece.
- Hold it in place with painter's tape.
- Peel a few inches of liner, set the end under the molding.
- Press along, then firm pressure.
Across the door gap
Front and rear pieces should meet the same line at the gap. Check before pressing the second.
Doors
Swing each door fully after installing.
Why a small kit
Four pieces means a quick job and a modest accent: a band of steel under the molding without extending the full length of a long SUV.
What to send when you call
Year, a side photo showing the molding, and a close-up of where the molding crosses a door gap.
Supplies and care
Tape measure, painter's tape, car soap, isopropyl alcohol, microfiber cloths. Wait a day before washing.
Preview it
Hold a strip of painter's tape five and a half inches below the molding on a front door, step back, and decide whether that band suits your Suburban. It takes a minute and saves trouble.
Weather
Install on a dry, mild day in the shade; cold or damp panels weaken the first grab of the tape.
Questions: 877-752-3811, SKU TH40199.
Long-SUV perspective
On a body as long as this, four pieces cover a limited stretch, and the product photos show which. Compare them with your own doors before buying. If you were expecting coverage over the rear quarter or toward the bumpers, this record doesn't describe that.
The four 5.5-inch Suburban pieces are TH40199 with UPC 691821263462; ring 877-752-3811 about fit.
TH40199 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH40199 |
| UPC | 691821263462 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5.5" |
| Coverage / notes | Cut to molding; Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2000-2005 Chevrolet Suburban |
Fitment: TH40199
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Suburban | 2000-2005 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH40199 Rocker Panel Trim, Upper Kit
Which Suburban is TH40199 for?
2000-2005 Chevrolet Suburban 4-door SUV.
How many pieces?
Four.
How far down does it reach?
5.5" below the molding.
What does "cut to molding" mean?
The record doesn't define it. Check the photos or call 877-752-3811.
