Product Description
Escalade ESV & EXT 2007-2014 Upper Rocker Kit, 6", 4 Pieces (TH47257)
TH47257 is the Upper Kit for the Cadillac Escalade ESV and Escalade EXT, both 2007-2014. Four polished stainless steel pieces, 6" wide, spanning "from the bottom of the molding DOWN to the specified width."
ESV and EXT on one record
The fitment has two rows, one tagged "4-door, ESV" and the other "4-door, EXT," and the title names the ESV and EXT too; this is the record for those two. The standard Escalade's Upper Kit is a separate record with the same width and piece count.
Same pieces for both?
The data gives one kit for two bodies and doesn't say whether all four pieces fit identically on each. If you'd like to confirm before ordering, call 877-752-3811 with your model.
Measure below the molding
Each piece's top edge meets the bottom of the side molding and the steel extends six inches down. Check that the molding is on every door and secure, and that there's about six inches of door beneath it. Measure on a front and a rear door.
No siblings
Nothing is linked to this record. Accessories for the standard Escalade are linked to its own kit, and some of them are marked as not fitting the ESV or EXT.
What it's made of
- Polished 304 stainless, 26 gauge, of high quality.
- The steel is made in the USA.
- Goes on the Escalade over the current surface with 3M automotive-grade acrylic foam tape.
QAA states the tape under the four Escalade ESV and EXT strips will hold for a lifetime and won't cause any damage to the Cadillac.
Preparing the doors
Wash, rinse, dry. Wipe the full band below the molding with isopropyl alcohol, including the corner at the molding's lower edge. Loose molding should be re-secured first; molding isn't part of the kit.
Four pieces
The data doesn't map them. Sort with the product photos and number each liner.
Putting it on
- Tape a piece in place, top edge against the molding.
- Check from a few feet back.
- Peel back a little liner, fix one end, and press along.
- Press firmly across the whole face.
Check the line
Top edges should follow the molding across the door gaps.
After
Open each Escalade door to check it clears, then wait a day to wash.
Care
Mild soap, soft cloth, towel dry.
Conditions
Work in a garage or on a mild, dry day.
A helper
A second person helps hold the wide pieces level.
Before ordering
Confirm the badge says ESV or EXT, the year falls between 2007 and 2014, the molding is on every door, and there are about six inches of door below it. If all four check out, this record fits. If you have a standard Escalade, or a strip is missing on any door, send photos to 877-752-3811 before you buy.
What to send if you call
Year, ESV or EXT, and a photo of a full side with a tape measure held from the molding to the door bottom.
Mock-up
Painter's tape six inches below the molding on one door shows the coverage.
ESV and EXT owners can call 877-752-3811 about kit TH47257, UPC 691821428182.
TH47257 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH47257 |
| UPC | 691821428182 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6" |
| Coverage / notes | Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2014 Cadillac Escalade ESV and 2007-2014 Cadillac Escalade EXT |
Fitment: TH47257
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac Escalade ESV | 2007-2014 | 4-door, ESV |
| Cadillac Escalade EXT | 2007-2014 | 4-door, ESV |
| Cadillac Escalade ESV | 2007-2014 | 4-door, EXT |
| Cadillac Escalade EXT | 2007-2014 | 4-door, EXT |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH47257 Rocker Panel Trim, Upper Kit
What does TH47257 fit?
The Cadillac Escalade ESV and Escalade EXT, 2007-2014.
Does it fit the standard Escalade?
No. The standard Escalade has its own Upper Kit.
Where does it go?
From the bottom of the side molding down 6".
How many pieces?
Four.
