Product Description
Chevrolet Traverse 2009-2017 Molding Inserts, Cut Long, No Logos, 0.75", 4 Pieces (TH49167)
TH49167 is the Traverse molding insert kit for molding without logos. The note reads "Cut Long, No "GM" Logo, No "TRAVERSE"." It fits the 2009-2017 Chevrolet Traverse four-door SUV with four polished stainless steel inserts, 0.75" wide.
For clean molding
If the side molding on your Traverse carries no GM logo and no TRAVERSE logo, this is the kit. With nothing to cut around, the pieces are cut long. The two sibling kits are for molding with logos: TH49165 ("GM & TRAVERSE," cut short) and TH49166 ("GM," cut long). If logos were removed from your molding at some point, send a photo to 877-752-3811 if you're unsure which kit suits it.
Check the molding first
Look at the molding on each door. All of it should be logo-free for this kit.
A slim line
At three-quarters of an inch, small misalignments show. Center each insert carefully on its strip before pressing it down.
Material
The four 0.75" Traverse molding inserts are cut long, without GM or TRAVERSE logo cutouts; QAA forms them in the USA from polished 26 gauge 304 stainless steel and sets them with 3M automotive-grade acrylic foam tape. QAA states it will hold for a lifetime.
Prep
Clean the molding with soap and water and let it dry. Then go over each insert area with isopropyl alcohol, repeating until no residue shows on the cloth.
Installing
Tape an insert in position and check it from a few feet away. Then peel a few inches of liner at one end, set it, and work along the strip while the liner comes away. Press firmly over the whole insert. Front and rear inserts should line up across the door gap.
Four pieces
The record doesn't map them. Compare with the product photos and label the liners.
Linked accessories
GC49166, PP49165, PP49166, WQ49165 and WZ49165.
After
Open every Traverse door to check clearance; no washing for a day.
Before ordering
Confirm a Traverse from 2009 to 2017, molding present and secure on all four doors, and no logos anywhere on it. If your molding has a GM logo, or both logos, one of the sibling kits is the listed match instead. When in doubt, send a photo of each side to 877-752-3811.
Molding condition
Press along each strip with your fingertips. Re-secure any section that lifts before installing; the steel can only sit as flat as the strip beneath it.
Traverse insert spacing
Measure each Traverse insert end from the door edges and keep it consistent.
Care
Mild soap and a soft cloth after the first day. No abrasive pads.
Conditions
Dry, mild weather or a garage, inserts at room temperature.
What to send if you call
Year and close photos of the molding on each door. We will check them against the three Traverse kits and tell you which one the record lists for your molding.
A helper
A second pair of hands keeps each slim insert centered while you set the first end.
Preview
A strip of painter's tape along each molding shows the finished line before you order.
Questions about Traverse kit TH49167, UPC 691821620838, go to 877-752-3811.
TH49167 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH49167 |
| UPC | 691821620838 |
| Part type | Rocker Panel Trim, Insert Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.75" |
| Coverage / notes | Cut Long, No "GM" Logo, No "TRAVERSE"; Side Molding |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2009-2017 Chevrolet Traverse |
Fitment: TH49167
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Traverse | 2009-2017 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2009-2017 Chevrolet Traverse
- GC49166: 1-piece Gas Door Cover Trim
- PP49165: 4-piece Pillar Post Trim
- PP49166: 6-piece Pillar Post Trim
- TH49165: 4-piece Rocker Panel Trim, Insert Kit
- TH49166: 4-piece Rocker Panel Trim, Insert Kit
- WQ49165: 6-piece Wheel Well Accent Trim
- WZ49165: 4-piece Wheel Well Fender Trim Molding
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Insert Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH49167 Rocker Panel Trim, Insert Kit
What does TH49167 fit?
The Chevrolet Traverse four-door SUV, 2009-2017, with no GM or TRAVERSE logo on the molding.
My molding has logos.
See TH49165 (GM & TRAVERSE) or TH49166 (GM).
How wide are the inserts?
0.75".
How many pieces?
Four.
