Product Description
Cadillac SRX 2004-2005 Rocker Trim Below the Doors, 2.25", 6 Pieces (TH44260)
TH44260 is an on-the-rocker kit for the Cadillac SRX four-door SUV, 2004-2005. Six polished stainless steel pieces, each 2.25" wide, go beneath the doors; the record's note is "Installs below the door."
Two model years
The fitment covers only 2004 and 2005. Other SRX records in the catalog run longer, but this one doesn't. If your SRX is newer than 2005, this record doesn't list it; call 877-752-3811 before ordering.
No linked parts
Nothing is attached to this record, so the sheet doesn't pair it with door, pillar or wheel well trim. If you want other SRX trim, ask us what fits your year.
Under the doors
The steel sits on the rocker beneath the door bottoms, not on the doors themselves. Close each door and look at the panel underneath: it needs a flat, sound area about two and a quarter inches tall.
Material
The six 2.25" 2004-2005 SRX strips go below the doors; QAA cuts them in the USA from polished 26 gauge 304 stainless steel and sets them with 3M automotive-grade acrylic foam tape over the existing surface. According to QAA, that tape will hold for a lifetime without harming the Cadillac.
Six pieces, no map
The record doesn't describe how the six pieces are laid out. Use the product photos and label every liner.
Inspection
Rocker panels take stone hits. Look along each one with a light and repair any chips in the band before installing.
Cleaning
Wash with soap, scrub the lower edge, rinse, and dry completely. Then wipe the band with isopropyl alcohol, switching cloths as they pick up dirt.
Marking a line
Measure a fixed distance below the door bottoms and place painter's tape marks at several points. Sight along them from the bumper so the pieces run straight.
Applying
- Dry-fit each piece against your marks.
- Peel a few inches of liner.
- Set the piece and press along as the liner comes away.
- Go over the full piece with firm pressure.
After
Open each door and confirm the bottom clears the steel. Check the line from a few steps back. Wait a day before washing.
SRX spacing
Measure piece ends from the wheel openings and door gaps and hold the rest to those positions.
Conditions
Dry, mild weather or a garage; warm the parts first if it's cool.
Care
Wash with mild soap and a soft mitt, and dry. Rinse off road salt in winter.
Before ordering
Check that your SRX is a 2004 or 2005, that you want trim beneath the doors rather than on them, and that the rocker panel under each door is flat and sound where the steel will sit. If any of those is uncertain, send a photo of the full side and your year to 877-752-3811.
Supplies
Kneeling pad, work light, painter's tape, tape measure, isopropyl alcohol and microfiber cloths.
A helper
Working this low is easier with someone to hold the far end of each piece off the paint while you set the near end on your marks.
SRX owners can call 877-752-3811 about kit TH44260, UPC 691821744435.
TH44260 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH44260 |
| UPC | 691821744435 |
| Part type | Rocker Panel Trim, On the rocker |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 2.25" |
| Coverage / notes | Installs below the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2005 Cadillac SRX |
Fitment: TH44260
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac SRX | 2004-2005 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, On the rocker
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH44260 Rocker Panel Trim, On the rocker
Which SRX years does TH44260 fit?
2004-2005, four-door SUV.
Where does it go?
Below the door, on the rocker.
How many pieces and how wide?
Six pieces, 2.25" wide.
Is other SRX trim linked?
No siblings are linked. Call 877-752-3811 to ask about other trim.
