Product Description
Dodge Caliber 2007-2012 Tapered Lower Kit, 2.25"-2", 6 Pieces (TH47950)
TH47950 is a six-piece Lower Kit for the Dodge Caliber four-door hatchback, 2007-2012. The polished stainless steel has a tapered width given as 2.25" - 2", and the note says it "Spans from the bottom of the door UP to the specified width."
Two Caliber Lower Kits
- TH47950 (this kit): six pieces, tapered from two and a quarter inches to two inches.
- TH47951: four pieces, 4", with the note "On the doors only."
Both follow the bottom edge, but they differ in width, piece count and wording. This record doesn't carry the "doors only" note and doesn't say whether its further pieces go beyond the doors. Compare the product photos of both and call 877-752-3811 if you can't tell which suits your car.
The taper
The width changes by a quarter inch along the kit. The record lists it as 2.25" to 2" but doesn't say which end is which or whether each piece tapers. Lay the pieces out and match them to the photos before installing.
Material
For the 2007-2012 Caliber hatchback, QAA cuts six strips in the USA from polished 26 gauge 304 stainless, and they rise from the door bottom on 3M automotive-grade acrylic foam tape. QAA says that tape will hold for a lifetime without harming the Dodge.
Prep
Check the bottom edges for chips and dents first. Then wash, rinse, dry, and wipe the lower band with isopropyl alcohol.
Install
Painter's tape holds each piece while you check it with the door shut. Peel a little liner, set the end flush with the bottom edge, and press along. Firm pressure to finish. Keep each taper running the way the photos show.
Linked Caliber parts
GC47950 gas door cover, LP47950 plate bezel, LPS47950 plate surround, MC47950 mirror covers, PP47950 / PP47951 / PP47952 pillar posts, RW47950 rear window trim, WQ47950 wheel well accent trim and WS47950 window sills. SGR47950 is also linked, described as a "Logo or emblem" with the note "Impala Emblem," which doesn't match a Caliber; check its photos or call before ordering it.
After
Check each Caliber door clears the trim. Wait a day to wash.
Care
Mild soap and a soft mitt for the Caliber.
Conditions
Pick a garage or a dry, mild day for the hatchback.
What to send if you call
Year, a full side photo, and a close shot of a door bottom.
Before ordering
A Caliber hatchback from 2007 to 2012 with clean, straight door bottoms. Then the real decision: this six-piece tapered kit or the four-piece four-inch doors-only kit. Put painter's tape at about two inches on one door and at four inches on another, walk around the car, and see which look you prefer. If you still can't decide, or you want to know exactly where the six pieces go, call 877-752-3811 with a photo of a full side.
Caliber taper spacing
Measure from the Caliber's door gaps to keep piece positions consistent.
A helper
Someone steadying the door keeps each piece flush with the edge.
Questions on the six-piece Caliber kit TH47950 (UPC 691821420810) go to 877-752-3811.
TH47950 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH47950 |
| UPC | 691821420810 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 2.25" to 2" tapered |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2012 Dodge Caliber |
Fitment: TH47950
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Caliber | 2007-2012 | 4-door, Hatchback |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2012 Dodge Caliber
- GC47950: 1-piece Gas Door Cover Trim
- LP47950: 1-piece License Plate Bezel
- LPS47950: 1-piece License Plate Surround Trim
- MC47950: 2-piece Mirror Cover Set
- PP47950: 4-piece Pillar Post Trim
- PP47951: 6-piece Pillar Post Trim
- PP47952: 8-piece Pillar Post Trim
- RW47950: 2-piece Rear Window Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH47950 Rocker Panel Trim, Lower Kit
What does TH47950 fit?
The Dodge Caliber four-door hatchback, 2007-2012.
How wide is it?
Tapered, 2.25" to 2", spanning up from the bottom of the door.
How is it different from TH47951?
TH47951 is four pieces at 4", doors only. Call 877-752-3811 to compare.
How many pieces?
Six.
