Product Description
2007-2012 Dodge Caliber Lower Door Trim, Doors Only, 4", 4 Pieces (TH47951)
TH47951 is the wider of the two Caliber Lower Kits: four polished stainless steel pieces at 4" for the Dodge Caliber four-door hatchback, 2007-2012. The note reads "On the doors only, spans from the bottom of the door UP to the specified width."
Four inches, doors only
The steel goes on the four doors and stops there. It rises four inches from the bottom edge of each door. Before ordering, mark that height on a front and a rear door with painter's tape. If it runs into a body line or anything else on your Caliber, you'll see it right away.
The narrower alternative
TH47950 is a six-piece Lower Kit with a tapered width listed from two and a quarter inches to two inches, and it doesn't carry the "doors only" note. The record doesn't explain where its two further pieces go. If you're deciding between the two, compare the product photos and call 877-752-3811.
One piece per door
Four pieces and four doors. The record doesn't state the assignment outright; match each piece to a door using the product photos and write it on the liner.
Bottom edges
The lower edge of each door is the reference for the whole kit. Open the doors and look underneath for chips, dents or rust, and repair them first.
Material
The four 4" Caliber strips go on the doors only; QAA cuts them in the USA from polished 26 gauge 304 stainless steel and sets them from the door bottom up with 3M automotive-grade acrylic foam tape. According to QAA, the tape will hold for a lifetime with no harm to the hatchback.
Prep a four-inch band
Wash, rinse and dry the lower doors. Then wipe the full four inches with isopropyl alcohol in overlapping passes, down to the edge.
Mounting
Hold each piece with painter's tape and close the door to check the gaps front and rear. Open it, peel a short length of liner, set the end flush with the bottom edge, and press along while the liner comes away. Press firmly over the entire face, not just the edges.
Matching heights
Each front and rear piece should meet at the door gap at the same height.
Linked Caliber parts
Gas door cover GC47950, plate bezel LP47950 and plate surround LPS47950, mirror covers MC47950, pillar kits PP47950, PP47951 and PP47952, rear window trim RW47950, wheel well trim WQ47950 and window sills WS47950. The linked SGR47950 emblem record carries an "Impala Emblem" note; check it before ordering.
After
Open and close each door a few times. Wait a day before washing.
Care
Clean the Caliber with mild soap and a soft cloth.
Conditions
Garage, or a dry and mild day.
Before ordering
Caliber hatchback, 2007-2012, four clean door bottoms, and four inches of clear door above each. If that's your car, this kit fits the description.
A helper
A second person steadying the door keeps each wide piece flush with the edge.
What to send if you call
Year and a photo of a full side with the doors closed.
Dodge Caliber kit TH47951 carries UPC 691821424191; Quality Automotive Trims takes calls at 877-752-3811.
TH47951 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH47951 |
| UPC | 691821424191 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4" |
| Coverage / notes | On the doors only, spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2012 Dodge Caliber |
Fitment: TH47951
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Caliber | 2007-2012 | 4-door, Hatchback |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2012 Dodge Caliber
- GC47950: 1-piece Gas Door Cover Trim
- LP47950: 1-piece License Plate Bezel
- LPS47950: 1-piece License Plate Surround Trim
- MC47950: 2-piece Mirror Cover Set
- PP47950: 4-piece Pillar Post Trim
- PP47951: 6-piece Pillar Post Trim
- PP47952: 8-piece Pillar Post Trim
- RW47950: 2-piece Rear Window Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH47951 Rocker Panel Trim, Lower Kit
What does TH47951 fit?
The Dodge Caliber four-door hatchback, 2007-2012.
Where does it go?
On the doors only, 4" up from the bottom edge.
How is it different from TH47950?
TH47950 is six pieces, tapered, without the doors-only note. Call 877-752-3811 to compare.
How many pieces?
Four.
