Product Description
2007-2011 Dodge Nitro Side Molding Inserts, 1", 4 Pieces (TH47941)
TH47941 lays a one-inch strip of polished stainless steel onto the side molding of a 2007-2011 Dodge Nitro four-door SUV. There are four inserts, and the placement note is "Side Molding."
An accent on the strip itself
Unlike the Nitro's Lower Kit (TH47940, six pieces at 3.75" on the door bottoms), these inserts don't touch the paint. They sit on the molding. So the molding is the thing to check: it has to be on all four doors, firmly attached, and close to 1" across its face. The data doesn't say whether the two Nitro kits are meant to go on together; if you're considering both, call 877-752-3811.
Four inserts
Four doors and four inserts. The record doesn't confirm one per door, so compare each with the product photos and mark its liner before you start.
If your molding isn't original
The record describes the listed SUV. If the molding on your Nitro has been replaced, painted, or removed on any door, send a photo to 877-752-3811 before ordering. The kit doesn't include molding.
Material
The four 1" Nitro inserts are USA-made, polished 26 gauge 304 stainless steel, mounted on the existing side molding with 3M automotive-grade acrylic foam tape. According to QAA, the tape will hold for a lifetime without harming the Dodge SUV.
Cleaning the molding
Wash with soapy water, rinse, and dry. Then wipe each strip with isopropyl alcohol until no residue shows on the cloth. Dressing and protectant both need to come off.
Placing each insert
- Center it on the strip with painter's tape.
- Check the ends and the line along the door.
- Peel a short length of liner and set the first end.
- Press along the strip as the liner comes away, then press firmly overall.
Across the door gap
The front and rear inserts should line up at the gap.
Other Nitro parts
The group links a license bar (LB47940), plate bezel (LP47940), pillar posts (PP47940, PP47941), rear bumper and rear deck accents (RB47940, RD47940), a lower grille accent (SG47940), wheel well trim (WQ47940) and window sills (WS47940).
After installing
Open each door to check clearance. A day before the first wash.
Care
Wash the Nitro trim with mild soap and a soft cloth.
Weather
Fit the Nitro in a garage or on a dry, mild day.
Before ordering
Nitro, 2007-2011, molding on every door, about an inch wide. That's the whole checklist for this kit.
Mock-up
Painter's tape along each strip shows the line before you buy.
A helper
A second pair of hands keeps the far end centered.
Molding condition
Press along every strip with your fingertips. If a section moves or lifts at an end, re-secure it before installing; the steel can only sit as flat as the strip beneath it.
What to send if you call
Year and a close photo of the molding with a ruler across its face.
Nitro insert ends
Measure the first inserts' ends from the door edges and set the rest to them.
For Nitro kit TH47941, UPC 691821745906, Quality Automotive Trims answers on 877-752-3811.
TH47941 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH47941 |
| UPC | 691821745906 |
| Part type | Rocker Panel Trim, Insert Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1" |
| Coverage / notes | Side Molding |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2011 Dodge Nitro |
Fitment: TH47941
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Nitro | 2007-2011 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2011 Dodge Nitro
- LB47940: 1-piece License Plate Bar Accent
- LP47940: 1-piece License Plate Bezel
- PP47940: 4-piece Pillar Post Trim
- PP47941: 6-piece Pillar Post Trim
- RB47940: 1-piece Rear Bumper Trim Accent
- RD47940: 1-piece Rear Deck Accent
- TH47940: 6-piece Rocker Panel Trim, Lower Kit
- WQ47940: 6-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Insert Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH47941 Rocker Panel Trim, Insert Kit
What does TH47941 fit?
The Dodge Nitro four-door SUV, 2007-2011.
Where do the inserts go?
On the side molding. They're 1" wide.
Is molding included?
No.
How many pieces?
Four.
