Product Description
2007-2011 Dodge Nitro Rear Bumper Accent, 8.75 Inches Wide (RB47940)
RB47940 covers the rear bumper of the Dodge Nitro 4-door SUV from 2007 through 2011 with a single piece of mirror-polished 304 stainless steel. The listed width is 8.75 inches. It is made in the USA and installs with 3M tape.
An unusually wide listing
A width of 8.75 inches is far broader than a thin bumper strip. The catalog does not list a length or describe the exact shape of this piece. Look carefully at the product photos to see how much of the bumper it covers, and call if you want to confirm that the coverage is what you expect.
Years
The Nitro 4-door SUV for 2007, 2008, 2009, 2010, and 2011 is on the record.
The rest of the rear
Three linked pieces live near the back:
- LB47940, a license bar above the plate with a logo cut-out
- LP47940, a license plate bezel
- RD47940, a rear deck accent at 1.25 inches
With the bumper accent, those give the back of the Nitro four coordinated stainless pieces.
Sides, windows, and grille
TH47940 is a six-piece lower rocker kit at 3.75 inches that spans from the bottom of the door upward, and TH47941 is a four-piece side molding insert kit at one inch. WQ47940 is a six-piece wheel well accent. PP47940 and PP47941 are four- and six-piece pillar kits, WS47940 dresses the window sills, and SG47940 is a lower front grille accent at 3.5 inches.
What you are getting
A polished stainless accent that adheres over the rear bumper cover. It is cosmetic and leaves the bumper in place.
Material
26-gauge 304 stainless with a mirror finish. There is no plating, so the shine cannot peel away.
How it holds
The 8.75" Nitro accent sits on the existing bumper surface, held by 3M automotive-grade acrylic foam tape. QAA says it will hold for a lifetime without harming the Dodge.
Preparing a large footprint
With this much tape contacting the bumper, cleanliness across the whole area is essential. Wash and dry, then wipe the entire mounting zone with a residue-free cleaner. On a Nitro of this age, look for scuffs, chips, or textured spots that would keep the tape from sitting flat, and address them first.
Installing
Dry-fit with the liner on and outline the edges with masking tape. Check from behind the SUV that it sits level. On a dry, mild day, peel the liner and press from the center outward across the full surface. Wait a few days before washing. The Installation tab has full steps.
Care
Mild soap, water, and a soft towel. Avoid abrasive pads on the polished face.
Two people help
A piece this wide is easier to place with a helper. One person holds each end while the other checks the measurements and the view from behind. Lower it onto the marks together so neither end touches down early, because foam tape grabs on contact and is hard to reposition.
Part details
SKU RB47940, UPC 691821638734. Call Quality Automotive Trims at 877-752-3811 with coverage questions.
RB47940 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB47940 |
| UPC | 691821638734 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 8.75" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2011 Dodge Nitro |
Fitment: RB47940
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Nitro | 2007-2011 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2011 Dodge Nitro
- LB47940: 1-piece License Plate Bar Accent
- LP47940: 1-piece License Plate Bezel
- PP47940: 4-piece Pillar Post Trim
- PP47941: 6-piece Pillar Post Trim
- RD47940: 1-piece Rear Deck Accent
- TH47940: 6-piece Rocker Panel Trim, Lower Kit
- TH47941: 4-piece Rocker Panel Trim, Insert Kit
- WQ47940: 6-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB47940 Rear Bumper Trim Accent
Which vehicle does RB47940 fit?
The Dodge Nitro 4-door SUV, 2007 through 2011.
How wide is it?
The catalog lists 8.75 inches. Check the photos for its shape.
How many pieces?
One.
What rear trim goes with it?
LB47940 license bar with logo cut-out, LP47940 license plate bezel, and RD47940 rear deck accent.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface.
