Product Description
2007-2011 Toyota Camry Sedan Rear Bumper Accent, 2.125-Inch Polished Strip (RB27130)
RB27130 is a one-piece rear bumper accent with a listed width of 2.125 inches, cataloged for the Toyota Camry 4-door sedan from 2007 through 2011. It is 304 stainless steel with a mirror polish, made in the USA, and it attaches with 3M tape.
Width and fitment
The catalog gives a width of 2.125 inches and no length. The fitment is the 4-door sedan for 2007, 2008, 2009, 2010, and 2011. A Camry outside those years has its own listings.
A full rear package is available
QAA links a well-stocked set of rear pieces to this Camry:
- LB27130, a license bar above the plate
- LP27130, a license plate bezel
- RD27130, a rear deck accent
- GC27130, a gas door cover
Together with this accent, those pieces dress nearly every bright-trim spot on the rear of the sedan.
Side trim, with useful notes
There are two wheel well kits, and the notes tell them apart. WQ27131 is the full-length version. WQ27130 is cut to fit alongside a rocker kit, which is sold separately. The rocker options are TH27130, an eight-piece lower kit, and TH27131, a two-piece kit that installs below the door. PP27130 and PP27131 pillar kits and RI27130 roof inserts round out the list.
What it is
Decorative trim that adheres to the rear bumper cover as a polished band. The bumper is not modified.
Material
26-gauge 304 stainless steel, mirror polished. The finish is the metal itself, so nothing can peel.
Mounting
On the Camry, the 2.125" bumper accent sits on the existing surface, held by 3M automotive-grade acrylic foam tape. That tape, QAA says, will hold for a lifetime and won't mark the Toyota.
A wider strip needs a cleaner surface
At just over two inches wide, the tape covers a good amount of bumper. Wash and dry the area, then wipe its full footprint with a residue-free cleaner. On a car of this age, check for chips and repair them first.
Install
On a dry, mild day, dry-fit with the liner on using the photos. Measure from each end to the bumper edges, mark the line with masking tape, then peel and press firmly across the whole strip, center first. Skip washing for a few days. The Installation tab has the details.
Care
Mild soap and a soft towel. A broad mirror surface shows scratches, so avoid abrasive pads.
Planning the rear in one go
If you want the license bar, bezel, or deck accent as well, order them together and install them in a single session. Fit the smaller pieces first, then center the bumper strip so everything lines up from behind the car. Each item has its own listing and photos, so check how they sit relative to one another.
Before ordering
Confirm that your Camry is the sedan and falls between 2007 and 2011.
Part details
SKU RB27130, UPC 691821731473. Call Quality Automotive Trims at 877-752-3811 for fitment questions or help choosing between the two wheel well kits.
Have a fit question before you order? Call Quality Automotive Trims at 877-752-3811 and mention SKU RB27130.
RB27130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB27130 |
| UPC | 691821731473 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 2.125" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2011 Toyota Camry |
Fitment: RB27130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2007-2011 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2011 Toyota Camry
- GC27130: 1-piece Gas Door Cover Trim
- LB27130: 1-piece License Bar, Above plate accent Trim
- LP27130: 1-piece License Plate Bezel
- PP27130: 4-piece Pillar Post Trim
- PP27131: 6-piece Pillar Post Trim
- RD27130: 1-piece Rear Deck Accent
- RI27130: 2-piece Roof Insert Trim
- TH27130: 8-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB27130 Rear Bumper Trim Accent
Which Camry does RB27130 fit?
The 4-door Toyota Camry sedan, 2007 through 2011.
How wide is it?
The catalog lists a width of 2.125 inches.
How many pieces?
One.
What rear trim pairs with it?
LB27130 license bar, LP27130 license plate bezel, RD27130 rear deck accent, and GC27130 gas door cover.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface.
