Product Description
Toyota Camry 2007-2011 Roof Insert Trim, 2-Piece, 0.563-Inch Stainless (RI27130)
RI27130 is a two-piece polished stainless roof insert for the Toyota Camry 4-door sedan, model years 2007 through 2011. The record lists it at 0.563 inch wide, a hair over half an inch, so it draws a crisp, thin line along the top of the car rather than a broad stripe.
About that width
0.563 is the decimal for nine-sixteenths of an inch. If you want to preview it, a half-inch painter's tape is close enough to give you a fair idea. Lay it where the photos show the inserts and look from a few steps away.
Made of
Both pieces are 26-gauge 304 stainless steel with a mirror polish, made in the USA. They mount with 3M automotive-grade acrylic foam tape and install over the existing surface of the roof. QAA states the tape will hold for a lifetime without causing damage to the vehicle surface.
Length and layout
No length is recorded, and the data doesn't describe where each piece sits. The photos show the layout. For a measurement, call Quality Automotive Trims at 877-752-3811.
An older roof needs more prep
On a car from these years, check the roof paint for sun wear. Wash it well, dry it, and inspect the paint where the tape will go. Chalky or oxidized clearcoat won't hold tape as well as a sound surface, so polish or repair that area first. Then wipe the footprint with a residue-free cleaner until a fresh cloth comes back clean.
Installing
Dry-fit each piece with the liner on, matching the photos, and mark its ends with painter's tape. Peel the first few inches of liner, anchor one end, and press along the strip as you pull the rest away. Fit the second Camry insert and compare from the front and back of the car. Choose a dry, mild day. The Installation tab lists every step.
Camry parts in the same record
- RD27130: rear deck accent
- RB27130: rear bumper trim accent, 2.125 inches
- LB27130 and LP27130: license bar and plate bezel
- TH27130: eight-piece lower rocker kit, 2.25 inches, spanning from the bottom of the door up
- TH27131: two-piece rocker trim on the rocker, 1.25 inches, below the door
- WQ27130: four-piece wheel well accent, cut to fit with the rocker kit
- WQ27131: four-piece wheel well accent, full length
- GC27130: gas door cover
- PP27130 and PP27131: four- and six-piece pillar kits
Those listings show their own finish; check each one before combining.
Wheel well choice
The two wheel well kits differ by one note: WQ27130 is cut to fit with the rocker kit, sold separately, while WQ27131 is full length. If you're fitting rocker trim, the first is the one meant to work with it.
Upkeep
Let the tape cure a few days before washing. Mild soap and a soft cloth after that. The shine is polished into solid 304, so there's no plating to wear thin.
What it is
This Camry roof trim is decorative and doesn't replace a factory part.
SKU RI27130, UPC 691821292929. Questions: 877-752-3811.
RI27130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RI27130 |
| UPC | 691821292929 |
| Part type | Roof Insert Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.563" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2011 Toyota Camry |
Fitment: RI27130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2007-2011 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2011 Toyota Camry
- GC27130: 1-piece Gas Door Cover Trim
- LB27130: 1-piece License Bar, Above plate accent Trim
- LP27130: 1-piece License Plate Bezel
- PP27130: 4-piece Pillar Post Trim
- PP27131: 6-piece Pillar Post Trim
- RB27130: 1-piece Rear Bumper Trim Accent
- RD27130: 1-piece Rear Deck Accent
- TH27130: 8-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Roof Insert Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RI27130 Roof Insert Trim
Which Camry does RI27130 fit?
The Toyota Camry 4-door sedan, 2007 through 2011.
How wide is it?
0.563 inch.
How many pieces?
Two.
Which wheel well kit goes with the rocker trim?
WQ27130 is cut to fit with the rocker kit; WQ27131 is full length.
How does it attach?
3M tape over the existing surface.
