Product Description
Toyota Camry 2007-2011 Trunk Accent in Mirror Stainless, One Piece (RD27130)
RD27130 is a one-piece rear deck accent for the Toyota Camry 4-door sedan, model years 2007 through 2011. It is 304 stainless steel, polished to a mirror, made in the USA, and installed over the existing surface with 3M tape.
Five years
2007, 2008, 2009, 2010, and 2011, sedan only. QAA lists later Camry years under separate SKUs.
Size
The catalog gives no width or length for this deck accent. By contrast, the matching rear bumper accent, RB27130, is listed at 2.125 inches. Use the photos to judge the deck strip, or call for a measurement.
A complete rear
This Camry can carry polish from the trunk lid down to the bumper:
- RB27130, rear bumper accent, 2.125 inches wide
- LB27130, license bar above the plate
- LP27130, license plate bezel
- GC27130, gas door cover
Roof inserts
RI27130 is a two-piece roof insert, 0.563 inches wide. It puts a thin line of polish up high to balance the trunk and bumper pieces lower down.
Rockers and wheel wells, matched
TH27130 is an eight-piece lower rocker kit, 2.25 inches wide, spanning up from the bottom of the door. TH27131 is a two-piece kit on the rocker, 1.25 inches wide, below the door. For the wheel wells, WQ27130 is the cut-to-fit set for use with a rocker kit sold separately, and WQ27131 is full length.
Pillar kits
PP27130 has four pieces and PP27131 has six.
Material
The Camry accent is 26-gauge 304 stainless, mirror polished, with no plating.
Mounting
The 2007-2011 Camry accent bonds with 3M automotive-grade acrylic foam tape; QAA says that tape will hold for a lifetime and won't harm the trunk lid.
Preparing the lid
Wash, rinse, and dry. Wipe the strip's footprint with a residue-free cleaner. On a Camry from these years, check for oxidized or chalky clearcoat and repair it first.
Top to bottom
Do the rear in order: this deck accent, then the license bar, then the bezel, then the bumper accent. Dry-fit each with the liner on against the photos, measure the ends to the panel edges, and mark with painter's tape. Peel and press from the center out on a dry, mild day.
Care
Wait a few days before washing. Mild soap and a soft cloth. Avoid rubbing compounds and dry the lid after rinsing so the mirror face stays clear.
Choosing a rocker
The eight-piece kit covers the doors from the bottom up to 2.25 inches. The two-piece kit sits on the rocker below the doors at 1.25 inches. Pick the eight-piece if you want more metal on the doors; pick the two-piece for a slimmer line lower down. Either way, match your wheel well set to it: cut-to-fit with a rocker kit, full length without.
Why stainless
Check each linked Camry listing, from the bumper accent and license pieces to the rockers, for its finish. There is no plating to fade unevenly between them.
Part details
SKU RD27130, UPC 691821556113. Call Quality Automotive Trims at 877-752-3811 to choose between the rocker kits.
RD27130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD27130 |
| UPC | 691821556113 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2011 Toyota Camry |
Fitment: RD27130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2007-2011 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2011 Toyota Camry
- GC27130: 1-piece Gas Door Cover Trim
- LB27130: 1-piece License Bar, Above plate accent Trim
- LP27130: 1-piece License Plate Bezel
- PP27130: 4-piece Pillar Post Trim
- PP27131: 6-piece Pillar Post Trim
- RB27130: 1-piece Rear Bumper Trim Accent
- RI27130: 2-piece Roof Insert Trim
- TH27130: 8-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD27130 Rear Deck Accent
Which Camry fits RD27130?
The Toyota Camry 4-door sedan, 2007 through 2011.
How wide is it?
No width is listed. The matching RB27130 bumper accent is 2.125 inches.
Which wheel well kit is for use with a rocker kit?
WQ27130, the cut-to-fit set. WQ27131 is full length.
Is there roof trim?
Yes, RI27130, a two-piece roof insert.
How does it mount?
With 3M automotive-grade acrylic foam tape.
