Product Description
2007-2011 Toyota Camry Sedan Stainless Steel Gas Door Cover (GC27130)
GC27130 gives the fuel door of the 2007-2011 Toyota Camry 4-door sedan a polished stainless finish. It's one piece of 304 stainless steel at 26 gauge, made in the USA, and it mounts with 3M automotive-grade acrylic foam tape.
Gas door required
First, the key point: GC27130 is not a replacement cap or replacement part, and the 2007-2011 Camry's existing gas door must be in place to install it.
Fitment
Toyota Camry, 2007-2011, 4-door sedan. Five model years on one row; the Fitment tab confirms it.
Roof to bumper: the Camry's matching trim
This Camry's cross-listed parts cover a lot of the car, top to bottom:
- Roof: RI27130, two-piece roof insert trim, 0.563 inches.
- Windows: PP27130 and PP27131, pillar post trim in four and six pieces.
- Trunk: RD27130, a one-piece rear deck accent.
- Plate: LB27130, a license bar above the plate, and LP27130, a license plate bezel.
- Bumper: RB27130, a one-piece rear bumper accent, 2.125 inches.
Rocker listings TH27130 and TH27131 and wheel well listings WQ27130 and WQ27131 are on the sheet too; their pages carry the details. QAA doesn't explain what PP27131's two additional pillar pieces cover.
Attachment
On the 2007-2011 Camry, the trim fits over the existing gas door with no drilling. Per QAA, the tape will hold for a lifetime without harming the sedan's surface.
Inspect, then clean
The adhesive attaches to the door's paint, so start by examining it. If you find chips, fading, or clear coat that's starting to peel, fix that before going further. Make sure the door also latches and sits level. Then wash the face with soapy water, rinse, wipe it with degreaser, and allow it to dry.
Line it up and press
Door shut, liner on: rest the trim in place and nudge it until the paint visible around it forms an even frame. If someone can hold it while you step back, all the better. Mark a corner on the body with painter's tape. Then remove the liner, set it to the mark, and apply firm pressure over the entire face. Give it another firm pass a minute later. Swing the door open gently to confirm it clears. The Installation tab covers this in more detail.
Finish and thickness
Polished 304 stainless looks bright and reflective. At 26 gauge it's thin sheet, so the overlay keeps a low profile on a moving door.
Picking a starting point
With roof inserts, pillars, plate trim and a bumper accent all available, there's a lot to choose from. The gas door is the simplest of them: one flat part, nothing else to match, and minutes to install. It's a natural first step, with the rest fitted over time.
Install day and after
A mild, dry day is best; keep the door dry that night. For ongoing cleaning, gentle soap and a soft cloth do the job. Wipe away fuel splashes after filling.
Questions
Camry questions about GC27130 can go to 877-752-3811; the Specs tab has the UPC.
GC27130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC27130 |
| UPC | 691821525188 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2011 Toyota Camry |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC27130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2007-2011 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2011 Toyota Camry
- LB27130: 1-piece License Bar, Above plate accent Trim
- LP27130: 1-piece License Plate Bezel
- PP27130: 4-piece Pillar Post Trim
- PP27131: 6-piece Pillar Post Trim
- RB27130: 1-piece Rear Bumper Trim Accent
- RD27130: 1-piece Rear Deck Accent
- RI27130: 2-piece Roof Insert Trim
- TH27130: 8-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC27130 Gas Door Cover Trim
Is GC27130 a replacement gas door?
No. It is not a replacement cap or replacement part. You must have the existing gas door to install this piece.
Which Camry years fit?
The 2007-2011 Toyota Camry 4-door sedan.
What is it made of?
26 gauge polished 304 stainless steel, made in the USA.
Is drilling needed?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape last?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
