Product Description
2025-2026 Toyota Camry Sedan Stainless Gas Door Trim (GC75130)
GC75130 is the polished stainless fuel door overlay listed for the Toyota Camry 4-door Sedan in model years 2025 and 2026. Only those two years appear on its Fitment row, so earlier Camry years are not covered by this part number. Check your records before ordering; if your Camry is older, call and we'll find the right number.
It is not a replacement cap and not a replacement part. You MUST have the existing gas door to install this piece. The trim is an accent for the face of the Camry's own door.
The Camry trim is a single piece of 304 stainless steel at 26 gauge, made in the USA. Pressing it onto the Camry's door, the 3M automotive-grade acrylic foam tape does the holding. It installs directly over the existing surface without drilling, and QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. The tape bonds straight to the paint, so give it a good surface to grip by repairing chipped edges, flaking clear coat or bubbles first, and check that the door sits flush when closed.
The cross-listed parts for this Camry are worth a look if you're planning a fuller set. Pillar post trim comes in four sizes: PP75130 with four pieces, PP75131 with six, PP75132 with eight and PP75133 with ten. QAA doesn't explain the larger sets' additional pieces, so each listing's photos are the guide. AT75130 is a fourteen-piece body side molding accent kit at 0.75 inches wide; look at its photos to see where each one sits. LB75130 is a one-piece license bar bezel whose own name says stainless steel, and RD75130 is a one-piece rear deck accent. Check each listing for its finish.
Installing it is quick, and it needs no special tools, just cleaning supplies and painter's tape. Wash the door with soapy water, rinse, dry well and wipe with a degreaser. Hold the trim in place on the closed door with the liner on, centring it until the band of paint around it is even, and mark it with painter's tape at two corners. Peel the liner, set the trim against the marks and press firmly across its entire face, then press again after a minute. Open the door slowly to make sure it clears. The Installation tab gives more detail.
Polished 304 stainless has a bright, mirror-like finish, and the thin 26 gauge sheet lies close to the door. Install on a dry, mild day and let the tape set overnight before washing the car. After that, mild soap and a soft cloth do the job; wipe away fuel drips after filling.
A gas door trim is a one-piece job with nothing to sort or pair, so it simply shows the polished finish on a new Camry before a pillar set or side accents. Questions? Call Quality Automotive Trims at 877-752-3811 and mention GC75130. The UPC is on the Specs tab.
GC75130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC75130 |
| UPC | 840251605285 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2025-2026 Toyota Camry |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC75130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2025-2026 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2025-2026 Toyota Camry
- PP75130: 4-piece Pillar Post Trim
- PP75131: 6-piece Pillar Post Trim
- PP75132: 8-piece Pillar Post Trim
- PP75133: 10-piece Pillar Post Trim
- AT75130: 14-piece Body Side Molding Accent Trim
- LB75130: 1-piece Stainless Steel License Bar Bezel
- RD75130: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC75130 Gas Door Cover Trim
Is GC75130 a replacement gas door?
No. It is not a replacement cap or replacement part. You MUST have the existing gas door to install this piece.
Which Camry years fit?
The 2025-2026 Toyota Camry 4-door Sedan.
Does it fit older Camry models?
Only 2025 and 2026 are listed. Call 877-752-3811 for earlier years.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
