Product Description
14-Piece Polished Stainless Side Accent for the 2025-2026 Toyota Camry Sedan (AT75130)
Fourteen pieces sounds like a lot for a side accent, and that piece count is what sets AT75130 apart. QAA cut this body side molding accent for the 2025-2026 Toyota Camry, the 4-door sedan, and divided the trim into fourteen sections. QAA lists the width at 0.75", which makes this a slim, elegant line of polished steel rather than a bold band. On a sleek modern sedan, that restraint is usually the right call.
The vehicle
Fitment is narrow and clear: Toyota Camry, 4-door sedan, model years 2025 and 2026. Those are the only years QAA lists, and the Fitment tab shows the row exactly as it appears in the catalog. If you own an earlier Camry, this kit is not cataloged for it, so please call before ordering.
Why so many pieces?
The catalog does not explain the breakdown of the fourteen pieces, and we will not guess. The product photos are the place to see exactly how this set lays out on the Camry, and they are worth studying before you start. Allow a little time for alignment, since fourteen pieces mean more seams to line up.
Three-quarters of an inch
At 0.75" wide, the accent is a subtle highlight. It catches light along the side of the car without changing its character, a good match for owners who want a finishing touch rather than a statement. If you want more shine, the companion trim below lets you build on it piece by piece, while the side accent stays understated.
Material and origin
QAA makes each piece in the USA from 26-gauge 304 stainless steel, polished to a mirror shine. Solid stainless means the brightness is in the steel, with no plated layer on plastic. Grade 304 is a standard stainless for exterior trim, and 26 gauge is the thickness of the sheet.
Installation
The back of every piece carries 3M automotive-grade acrylic foam tape, pre-applied by QAA, and the accent installs directly over the existing surface. No drilling and no part removal are needed. QAA states the tape will hold for a lifetime without causing any damage to the paint. With fourteen pieces, lay them out in order on a clean towel, dry-fit each one, then commit. Keeping the pieces in order saves you from swapping two similar sections by mistake. The Installation tab gives the full sequence.
Choosing companion trim
The 2025-2026 Camry sedan has four pillar post kits in the QAA catalog, which is unusual. PP75130 has four pieces, PP75131 has six, PP75132 has eight, and PP75133 has ten. The catalog does not state how they differ beyond the count, so compare the photos or call us. QAA also lists a one-piece license bar bezel, a one-piece rear deck accent, and a one-piece gas door cover for this Camry. All are linked in the Fitment tab.
Reach us
Call Quality Automotive Trims at 877-752-3811 for fitment help and give part number AT75130. You will find the UPC in the Specs tab.
AT75130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | AT75130 |
| UPC | 840251605254 |
| Part type | Body Side Molding Accent Trim |
| Pieces in kit | 14 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.75" |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2025-2026 Toyota Camry |
Fitment: AT75130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2025-2026 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2025-2026 Toyota Camry
- PP75130: 4-piece Pillar Post Trim
- PP75131: 6-piece Pillar Post Trim
- PP75132: 8-piece Pillar Post Trim
- PP75133: 10-piece Pillar Post Trim
- LB75130: 1-piece Stainless Steel License Bar Bezel
- RD75130: 1-piece Rear Deck Accent
- GC75130: 1-piece Gas Door Cover Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Side Molding Accent Trim
- Unpack all 14 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: AT75130 Body Side Molding Accent Trim
Which Camry does AT75130 fit?
The 2025 and 2026 Toyota Camry 4-door sedan.
How wide is the trim?
QAA lists it at 0.75" wide.
Why are there fourteen pieces?
QAA cut the accent into fourteen sections for this sedan. The catalog does not list each piece, so the photos are the best guide to the layout.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with pre-applied 3M acrylic foam tape. QAA states the tape will hold for a lifetime without damaging the paint.
Which pillar post kit should I buy?
There are four, PP75130 through PP75133, in four, six, eight, and ten pieces. Call 877-752-3811 and we will help you compare.
