Product Description
14-Piece Arrow Side Molding Accent Trim for the 2009-2013 Toyota Corolla Sedan (AT29112)
AT29112 is one of the more intricate kits QAA makes for the 2009-2013 Toyota Corolla. It is a fourteen-piece body side molding accent in polished stainless steel, and QAA describes it as "Arrow - 0.75" wide." That arrow profile gives the accent pointed, directional ends instead of square-cut strips, so the brightwork on the side of the Corolla looks shaped and intentional rather than simply taped on.
Fourteen pieces on a compact sedan
Fourteen pieces is a lot for a car the size of a Corolla, and it reflects how QAA broke the arrow design into segments that follow the body. The catalog does not say where each segment goes, so we will not speculate. The product photos show the arrangement clearly. Use them as your reference both when you order and when you install, and keep them open on your phone while you work.
Polished 304 stainless
Every segment is made in the USA from 26-gauge 304 stainless steel, then polished to a mirror shine. Because the material is solid stainless, the finish is the metal itself and not a plating over plastic. Grade 304 is one of the most common stainless steels in use, and 26 gauge describes the thickness of the sheet.
Installing an arrow kit
QAA pre-applies 3M automotive-grade acrylic foam tape to each piece. The trim installs directly over the existing surface of the Corolla, so there is no drilling and no removal of factory parts. QAA states the tape will hold for a lifetime without causing any damage to the surface. With an arrow design, alignment is everything. Lay the fourteen pieces out in order, compare them to the photos, and dry-fit the full run before you peel any backing. A strip of low-tack painter's tape can mark your reference line. The Installation tab walks through prep and order of work.
Matching trim for the same Corolla
QAA catalogs a full set of companion parts for the 2009-2013 Corolla sedan:
- Window trim packages: WP29113 is the full 16-piece package, WP29112 has upper trim and pillar posts with no sills, and WP29114 is upper trim only.
- Pillar post kits in four, six, and eight pieces, and a four-piece window sill set.
- A gas door cover with the crease contour, a license plate bezel, a rear deck accent at 1.375", a two-piece rocker trim below the door, and a four-piece wheel well accent at 0.75".
The wheel well accent shares the 0.75" width of this kit, so the two look consistent side by side. Links are in the Fitment tab.
Years
Listed for the 4-door Corolla sedan in 2009, 2010, 2011, 2012, and 2013. The Fitment tab shows the full catalog row, including the body style.
Questions
Call Quality Automotive Trims at 877-752-3811 with your model year and part number AT29112. We are glad to help you confirm the fit or plan a matched set of Corolla trim. The UPC and full specs are in the Specs tab.
AT29112 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | AT29112 |
| UPC | 691821740468 |
| Part type | Body Side Molding Accent Trim |
| Pieces in kit | 14 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.75" |
| Coverage / notes | Arrow - 0.75" wide |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2009-2013 Toyota Corolla |
Fitment: AT29112
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Corolla | 2009-2013 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2009-2013 Toyota Corolla
- GC29112: 1-piece Gas Door Cover Trim
- LP29112: 1-piece License Plate Bezel
- PP29112: 4-piece Pillar Post Trim
- PP29113: 6-piece Pillar Post Trim
- PP29114: 8-piece Pillar Post Trim
- RD29112: 1-piece Rear Deck Accent
- TH29112: 2-piece Rocker Panel Trim, On the rocker
- WP29112: 12-piece Window Trim Package
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Side Molding Accent Trim
- Unpack all 14 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: AT29112 Body Side Molding Accent Trim
Which Corolla is AT29112 for?
The 2009 to 2013 Toyota Corolla, 4-door sedan.
What does "arrow" mean here?
QAA lists the accent as an arrow profile, 0.75" wide. The photos show the shaped ends and layout.
How many pieces are included?
Fourteen.
What is it made from?
Polished 26-gauge 304 stainless steel, made in the USA.
Do I need tools to install it?
No drilling. The 3M acrylic foam tape is pre-applied and the trim goes over the existing surface. QAA states the tape will hold for a lifetime without damaging the paint.
Which window package is the complete one?
WP29113, the 16-piece full package with upper trim, pillar posts, and window sills.
