Product Description
2009-2013 Toyota Corolla Sedan Stainless License Plate Bezel (LP29112)
For the Toyota Corolla 4-door sedan built for model years 2009 through 2013, LP29112 is a single polished stainless License Plate Bezel. Five years, sedan only, no trim exclusions: that's the whole fitment row. The bezel is made in the USA from 26-gauge 304 stainless steel with a mirror finish, and its job is to frame the plate area.
What the catalog doesn't include is a size. There are no dimensions and no notes about openings, so the product photos are the reference for shape. Before ordering, look at your Corolla's plate area, including any lock, emblem or nearby lighting, and compare it with those photos. If the two don't agree, Quality Automotive Trims can confirm the fit at 877-752-3811; mention LP29112.
Install overview
It mounts with 3M automotive-grade acrylic foam tape and installs directly over the existing surface, so there is no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. On a sedan from these years, repair chips and lifting clear coat around the plate before anything else. Then wash, dry, wipe with rubbing alcohol, dry-fit with the liner on, and mark the position with painter's tape. The Installation tab takes you through peeling and pressing, and lists the temperature range.
Rear trim options
RD29112 is a one-piece Rear Deck Accent at 1.375", the other cataloged part for the back of the car. If you want both, open the two sets of photos together and picture them on your Corolla. The bezel's own size isn't listed, so the photos are the only way to judge the spacing.
Along the sides
AT29112 is a fourteen-piece body side molding accent with the note Arrow - 0.75" wide; the photos show what the arrow shape looks like. TH29112 is a two-piece rocker trim at 1.25" that Installs below the door. GC29112 is a one-piece gas door cover trim With crease contour. Pillar post kits come in four, six and eight pieces as PP29112, PP29113 and PP29114. WP29112, WP29113, WP29114, WQ29112 and WS29112 are cross-listed by number only. Check each listing for its finish.
Picking a first project
A fourteen-piece molding kit takes careful measuring; a one-piece bezel mostly takes clean paint and a steady hand. If you're new to tape-on trim, the bezel is a good place to learn how the foam tape behaves before tackling the side moldings. Pay attention to how firmly it grabs once the liner is off; that's the moment that teaches you to trust the dry fit and the painter's tape marks.
Checks before you order
Your records need to show a Corolla sedan between 2009 and 2013. If you keep a frame on the plate, put it on during the dry fit to see whether it overlaps the bezel. Choose the look you want before the liner comes off.
Upkeep
Wash with mild soap and water, rinse grit away before wiping, and dry with a soft towel. Avoid abrasive pads.
LP29112 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP29112 |
| UPC | 691821369591 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2009-2013 Toyota Corolla |
Fitment: LP29112
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Corolla | 2009-2013 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2009-2013 Toyota Corolla
- AT29112: 14-piece Body Side Molding Accent Trim
- GC29112: 1-piece Gas Door Cover Trim
- PP29112: 4-piece Pillar Post Trim
- PP29113: 6-piece Pillar Post Trim
- PP29114: 8-piece Pillar Post Trim
- RD29112: 1-piece Rear Deck Accent
- TH29112: 2-piece Rocker Panel Trim, On the rocker
- WP29112: 12-piece Window Trim Package
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP29112 License Plate Bezel
Which Corolla does LP29112 fit?
The 2009-2013 Toyota Corolla 4-door sedan.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Are dimensions listed?
No. Use the photos or call 877-752-3811.
What other rear trim is listed?
RD29112, a one-piece Rear Deck Accent at 1.375".
How many pieces?
One.
