Product Description
Stainless License Plate Bezel for the 2014-2019 Toyota Corolla Sedan (LP14112)
The Toyota Corolla 4-door sedan from 2014 through 2019 has sixteen other parts cross-listed with it, and LP14112 is the piece for the plate area. It is a one-piece License Plate Bezel made in the USA from 26-gauge 304 stainless steel with a mirror polish. The single fitment row covers all six of those model years, sedan only, with no trim exclusions.
What the listing doesn't include is a set of dimensions or any note about cutouts. That's normal for these bezels, but it means the product photos do the work a spec line would otherwise do. Look at the outline in the photos, then look at the plate area on your Corolla, including the lock, emblem and lighting around it. When the two agree, you can order with confidence. When they don't, call Quality Automotive Trims at 877-752-3811 and give them the SKU, LP14112.
Fitting it yourself
Installation is a tape job. The Corolla bezel attaches directly over the existing surface with 3M automotive-grade acrylic foam tape, no drilling needed. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Start by taking the plate off and setting the screws aside. Wash the area, rinse away the soap, and let everything dry, then wipe with rubbing alcohol until a clean cloth comes away clean. Check the paint around the plate for chips or flaking clear coat and deal with those first, because tape only holds as well as the surface under it. Dry-fit the bezel with its liner on, mark the spot with painter's tape, peel, place and press firmly all the way around. The Installation tab gives the temperature range.
Bezel and bar
LB14112, listed for the same sedan, is a one-piece License Bar, Above plate accent Trim. The bar is cataloged as an accent above the plate while this bezel frames the plate area, so they are different parts that can be used separately or together. Compare both sets of photos if you plan to run them as a pair.
The wider Corolla family
Among the parts with details on this sheet, AT14112 is a four-piece body side molding accent at 1". DH14112 is a four-piece door handle accent set and GC14112 a one-piece gas door cover trim. Pillar posts come three ways: PP14112 with four pieces, PP14113 with six and PP14114 with eight. Another nine parts are cross-listed by number only: RB14112, RD14112, TH14112, TH14113, WP14112, WP14113, WQ14112, WS14112 and WP14114. Their details live on their own listings, as do the finishes of everything here.
Where to begin
With that many options, the bezel is a low-stakes first step. It is a single piece in one spot, and once it's on, you can judge how polished stainless looks against your paint before deciding on pillars or rocker trim.
If you keep a frame on your plate, refit it during the dry fit to make sure it clears the bezel. Routine care is mild soap, water and a soft towel; avoid abrasive pads on the polished face.
LP14112 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP14112 |
| UPC | 641606029448 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2019 Toyota Corolla |
Fitment: LP14112
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Corolla | 2014-2019 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2019 Toyota Corolla
- AT14112: 4-piece Body Side Molding Accent Trim
- DH14112: 4-piece Door Handle Accent Trim
- GC14112: 1-piece Gas Door Cover Trim
- LB14112: 1-piece License Bar, Above plate accent Trim
- PP14112: 4-piece Pillar Post Trim
- PP14113: 6-piece Pillar Post Trim
- PP14114: 8-piece Pillar Post Trim
- RB14112: 1-piece Rear Bumper Trim Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP14112 License Plate Bezel
Which Corolla does LP14112 fit?
The 2014-2019 Toyota Corolla 4-door sedan.
Is it the same part as LB14112?
No. LB14112 is a License Bar, an above-plate accent. LP14112 is the bezel that frames the plate area.
How does it mount?
With 3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
What size is it?
Dimensions aren't listed. Use the photos or call 877-752-3811.
What material is it?
26-gauge 304 stainless steel, mirror polished, made in the USA.
