Product Description
License Bar Accent for the 2014-2019 Toyota Corolla Sedan, Polished 304 Stainless (LB14112)
LB14112 is for the Toyota Corolla 4-door sedan, model years 2014 through 2019. It is a single strip of trim that sits above the rear license plate, and of all the parts QAA lists for this Corolla, it is one of the simplest to put on: one piece, one surface, a few minutes once the area is clean.
The bar is 26-gauge 304 stainless steel, polished to a mirror finish and made in the USA. It mounts with 3M automotive-grade acrylic foam tape. The catalog says it installs directly over the existing surface, so no holes, no fasteners and no panels to remove. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Check two things before ordering
First, the car. The only fitment row is the Corolla sedan, 2014-2019. The model year is in your own records. Second, the space. The sheet gives no width and no note about cutouts or key access, so it can't tell you whether anything on your car interferes. Dealer stickers and aftermarket badges differ from car to car. Compare the area above your plate with the product photos. If they don't match, call Quality Automotive Trims at 877-752-3811 and give the part number LB14112.
Install notes
Wash and dry the area, wipe it with rubbing alcohol, and wait until it is fully dry. Hold the bar in place with the liner on and look from straight behind the car. Most of the visual effect depends on the bar being level and centered over the plate, so take a moment here. Put a small piece of painter's tape at each end as a mark. Peel the liner, line up the bar, and press firmly along its full length, then give it a second pass. Keep the trunk closed gently for the first day. Temperature tips are on the Installation tab.
The rest of the Corolla list
Sixteen other parts are cross-listed for this sedan, so a bar like this is often one piece of a larger plan. The sheet details AT14112, a four-piece body side molding accent at 1"; DH14112, a four-piece door handle accent; GC14112, a one-piece gas door cover trim; LP14112, a one-piece license plate bezel; and pillar post kits PP14112, PP14113 and PP14114 in four, six and eight pieces. RB14112, RD14112, TH14112, TH14113, WP14112, WP14113, WP14114, WQ14112 and WS14112 are listed by number only on this sheet. Open each listing for its type and photos, and check each one for its finish before mixing parts.
Why start with the license bar?
If you are considering several parts for this Corolla, the bar is a low-risk first step. It is a single piece in one spot, so you can see how polished stainless looks on your paint color before deciding on window, pillar or rocker pieces. Hold it, liner on, against the trunk in daylight.
Care
Wash with mild soap and water and dry with a soft cloth. That's all the polished surface needs.
The Corolla rows are repeated on the Fitment tab, and Specs gives the UPC.
LB14112 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB14112 |
| UPC | 691821494491 |
| Part type | License Bar, Above plate accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2019 Toyota Corolla |
Fitment: LB14112
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Corolla | 2014-2019 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2019 Toyota Corolla
- AT14112: 4-piece Body Side Molding Accent Trim
- DH14112: 4-piece Door Handle Accent Trim
- GC14112: 1-piece Gas Door Cover Trim
- LP14112: 1-piece License Plate Bezel
- PP14112: 4-piece Pillar Post Trim
- PP14113: 6-piece Pillar Post Trim
- PP14114: 8-piece Pillar Post Trim
- RB14112: 1-piece Rear Bumper Trim Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar, Above plate accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB14112 License Bar, Above plate accent Trim
Does LB14112 fit the Corolla hatchback?
Only the 4-door sedan, 2014-2019, is listed. Call 877-752-3811 with any other body style.
How many pieces?
One.
Is there a key or camera cutout?
The listing doesn't mention any. Compare the photos to your car.
How does it stay on?
3M automotive-grade acrylic foam tape, installed directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
What material is it?
Polished 26-gauge 304 stainless steel, made in the USA.
