Product Description
PP14113 Six-Piece Polished Stainless Pillar Covers, 2014-2019 Corolla Sedan
Six pillar covers for the Toyota Corolla sedan, model years 2014-2019, cut from polished 26 gauge 304 stainless steel and made in the USA. PP14113 is the middle choice among three Corolla pillar sets, and its one row (4-door, Sedan) is the same as the title.
Q: How do I pick between four, six and eight?
By the photos. PP14112 has four pieces, this set six, and PP14114 eight. None of the listings has a note or names its pillars, and none mentions a triangle piece. A higher count doesn't say where the further covers go, so compare outlines in each gallery and pick the set that takes in the posts you want. Torn between two Corolla sets? Their photos, or a call to 877-752-3811, will settle it.
Q: What else does the Corolla sheet list?
With details: a four-piece body side molding accent trim (AT14112, width 1), a four-piece door handle accent trim (DH14112), a one-piece gas door cover trim (GC14112), a one-piece "Above plate accent Trim" license bar (LB14112) and a one-piece license plate bezel (LP14112). By number only: RB14112, RD14112, TH14112, TH14113, WP14112, WP14113, WP14114, WQ14112 and WS14112. Those nine aren't described here, so read each listing before you pair it with this set; if one includes pillar covers, you'd be doubling up. Finishes are on each listing.
Q: Is drilling involved?
No. The covers attach with 3M automotive-grade acrylic foam tape directly over the existing surface, and nothing comes off the car.
Q: Why stainless?
Polished 304 has no plating to peel; the shine is the metal. At 26 gauge it lies slim against the pillar and keeps its shape.
Q: What should I gather?
Mild car soap, a bucket, two soft towels, isopropyl alcohol, a lint-free cloth, painter's tape, a pencil and, for the upper ends, a step stool.
Q: How do I prep?
Wash, rinse and dry the pillars, then wipe them with the alcohol and let it flash off. Take off any wax or coating where tape will sit.
Q: What's the fitting sequence?
Hold each Corolla cover up to the product photos to see where it goes. Going front to back, hold each Corolla cover with its backing on, sight along its edges until it hugs the post, and mark the ends with painter's tape. Write the location on the backing. Map the rest the same way. Then peel one backing at a time, set each cover in its marks, press firmly from end to end and along both edges, and carry on to the next. The Installation tab gives temperature range and cure time.
Q: Best weather?
Dry and mild, in shade or a garage. A hot panel or damp air works against tape, and a cool surface lets the alcohol flash off evenly before each cover goes down. A helper a few steps back can judge whether each cover sits level.
Q: What if a cover doesn't line up?
Keep its backing on and try another pillar first. Still off? Call Quality Automotive Trims at 877-752-3811 with PP14113 and your model year. When the parcel arrives, count six covers against the photos. Clean later with mild soap and a soft cloth.
PP14113 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP14113 |
| UPC | 691821403943 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2019 Toyota Corolla |
Fitment: PP14113
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Corolla | 2014-2019 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2019 Toyota Corolla
- AT14112: 4-piece Body Side Molding Accent Trim
- DH14112: 4-piece Door Handle Accent Trim
- GC14112: 1-piece Gas Door Cover Trim
- LB14112: 1-piece License Bar, Above plate accent Trim
- LP14112: 1-piece License Plate Bezel
- PP14112: 4-piece Pillar Post Trim
- PP14114: 8-piece Pillar Post Trim
- RB14112: 1-piece Rear Bumper Trim Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP14113 Pillar Post Trim
What does PP14113 fit?
The Toyota Corolla 2014-2019, tagged 4-door and Sedan.
Does it overlap with PP14112 or PP14114?
None of the three Corolla sets names its pillars. Compare photos and choose one.
Are the WP listings on this sheet described?
No, WP14112, WP14113 and WP14114 appear by number only. Check each listing before combining.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
