Product Description
Toyota Corolla Sedan 2014-2019 Rear Bumper Trim, Single Polished Strip (RB14112)
RB14112 is a one-piece rear bumper accent for the 4-door Toyota Corolla sedan from 2014 through 2019. It is mirror-polished 304 stainless steel, made in the USA, and it fastens with 3M tape over the existing bumper surface.
Years
2014, 2015, 2016, 2017, 2018, and 2019, 4-door sedan. One record covers all six years, so the same accent is listed for each of them.
Corolla trim that works with it
This Corolla has a large QAA lineup. For the rear of the car, look at:
- LB14112, a license bar above the plate
- LP14112, a license plate bezel
- RD14112, a rear deck accent
- GC14112, a gas door cover
Also linked are DH14112 door handle accents, AT14112 body side molding trim, WQ14112 wheel well accents, PP14112, PP14113, and PP14114 pillar kits, TH14112 and TH14113 rocker kits, and two window trim packages: WP14112 with sills and WP14113 without.
What it is
A strip of polished stainless that bonds to the rear bumper cover and brings brightwork to the back. It is decorative and does not modify the bumper.
Stainless, polished
26 gauge, 304 grade, mirror finish. No plating means no coating to fail.
Mounting
The Corolla bumper trim installs over the existing surface with 3M automotive-grade acrylic foam tape. Per QAA, it will hold for a lifetime without harming the Toyota.
Commuter prep
A daily-driven Corolla collects road film at the rear. Wash the bumper, dry it, and wipe the mounting area with a cleaner that leaves nothing behind. Repair chips before installing.
Install
Dry-fit the strip with the liner on, using the product photos. Measure from each end to the bumper edges so it sits centered, and mark the line with masking tape. On a dry, mild day, peel and press firmly from the middle outward. Wait a few days before washing. The Installation tab has the steps.
Care
Hand wash with mild soap and dry with a soft towel. Abrasive pads and gritty polish leave fine scratches, so keep them away.
Centering a single piece
With just one strip, there is no partner piece to hide a small offset. Use a tape measure during the dry-fit, compare the distance from each end to the corners of the bumper, and adjust until the numbers agree. Then step back to eye level directly behind the car for a last check before peeling.
Plan the rear in one session
If you intend to fit the license bar, plate bezel, or rear deck accent, consider ordering them together. Clean the whole back of the car once, install the smaller pieces first, and center the bumper accent last so everything lines up visually.
Why stainless
Because the mirror finish is the metal itself, it does not depend on a coating. That keeps the strip looking the same through years of commuting and washing.
Part details
SKU RB14112, UPC 691821277971. Call Quality Automotive Trims at 877-752-3811 with questions about fitment or about combining this accent with the other rear pieces.
RB14112 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB14112 |
| UPC | 691821277971 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2019 Toyota Corolla |
Fitment: RB14112
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Corolla | 2014-2019 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2019 Toyota Corolla
- AT14112: 4-piece Body Side Molding Accent Trim
- DH14112: 4-piece Door Handle Accent Trim
- GC14112: 1-piece Gas Door Cover Trim
- LB14112: 1-piece License Bar, Above plate accent Trim
- LP14112: 1-piece License Plate Bezel
- PP14112: 4-piece Pillar Post Trim
- PP14113: 6-piece Pillar Post Trim
- PP14114: 8-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB14112 Rear Bumper Trim Accent
Which Corolla does RB14112 fit?
The 4-door Toyota Corolla sedan, 2014 through 2019.
How many pieces?
One.
What rear trim pairs with it?
LB14112 license bar, LP14112 license plate bezel, and RD14112 rear deck accent.
Is bumper removal part of the job?
No. It mounts with 3M automotive-grade acrylic foam tape.
What is it made of?
Mirror-polished 26-gauge 304 stainless steel, made in the USA.
