Product Description
Eight-Piece Stainless Pillar Post Set for the 2014-2019 Toyota Corolla (PP14114)
PP14114 is the highest-count pillar set on the 2014-2019 Toyota Corolla sedan's sheet: eight covers, polished 26 gauge 304 stainless steel, made in the USA. Its fitment row, Toyota Corolla 2014-2019 with 4-door and Sedan tags, matches the title, and the covers go on with 3M automotive-grade acrylic foam tape directly over the existing surface.
| Corolla pillar set | Pieces | Notes |
|---|---|---|
| PP14112 | 4 | none |
| PP14113 | 6 | none |
| PP14114 | 8 | none |
None of the three listings names its pillars or mentions a triangle or mirror piece, so the count is the only recorded difference. Only the photos show where the further covers go. Compare the galleries and buy the set that covers what you want, and only one; we can talk it through at 877-752-3811.
Watch for overlap with other Corolla listings
The sheet cross-lists nine parts by number only, without descriptions: RB14112, RD14112, TH14112, TH14113, WP14112, WP14113, WP14114, WQ14112 and WS14112. Before combining any of them with an eight-piece pillar set, open its listing and check whether it already includes pillar covers. If it does, you'd be paying twice for the same area. A call to 877-752-3811 with both part numbers clears it up.
The parts this sheet does describe are AT14112 (four-piece body side molding accent trim, 1 width), DH14112 (four-piece door handle accent trim), GC14112 (one-piece gas door cover trim), LB14112 (one-piece license bar, "Above plate accent Trim") and LP14112 (one-piece license plate bezel). Finishes vary by listing.
Mounting and material
No holes and no removal; the tape sits over what's there. Polished 304 stainless has no plated skin to flake, and the 26 gauge sheet keeps each cover slim.
Preparing the Corolla
Hand-wash the pillars with mild shampoo, rinse and dry. Wipe each with rubbing alcohol on a lint-free cloth, letting it evaporate. Wax, sealant or coating must come off where the tape will land.
Eight covers without confusion
Spread the covers on a towel beside the photos. Work one post at a time: hold each cover in place with its liner on, adjust until both edges follow the post, mark the ends with painter's tape, and write the location on the liner. Map every cover before peeling anything. Then peel and press one cover at a time, firmly from end to end and along each edge, going straight on to the next. After each pair of Corolla covers, step away and look. The Installation tab gives temperature range and cure time.
Conditions
A dry day, out of direct sun, so the panel is cool and the alcohol dries evenly. A step stool for the upper ends; a helper if you have one, standing a few paces back to judge level. Don't rush the mapping step.
On arrival
Count eight covers against the photos. If one won't sit flush, keep the liner on and try another pillar, then call Quality Automotive Trims with PP14114 if needed. Upkeep is mild soap and a soft cloth. The Fitment tab shows the Corolla rows QAA cataloged.
PP14114 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP14114 |
| UPC | 691821663903 |
| Part type | Pillar Post Trim |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2019 Toyota Corolla |
Fitment: PP14114
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Corolla | 2014-2019 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2019 Toyota Corolla
- AT14112: 4-piece Body Side Molding Accent Trim
- DH14112: 4-piece Door Handle Accent Trim
- GC14112: 1-piece Gas Door Cover Trim
- LB14112: 1-piece License Bar, Above plate accent Trim
- LP14112: 1-piece License Plate Bezel
- PP14112: 4-piece Pillar Post Trim
- PP14113: 6-piece Pillar Post Trim
- RB14112: 1-piece Rear Bumper Trim Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP14114 Pillar Post Trim
What does PP14114 fit?
The Toyota Corolla 2014-2019, 4-door Sedan.
Is eight pieces the most for this Corolla?
Among the pillar sets on this sheet, yes. PP14112 has four and PP14113 six.
Could another listing on this sheet already include pillar covers?
Nine parts appear by number only here, including WP14112, WP14113 and WP14114. Check each listing or call 877-752-3811 before combining.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
Is there a triangle piece?
The listing has no notes and doesn't name one.
