Product Description
PP14111: Six Stainless Pillar Post Covers for the 2014-2019 Highlander
Six covers of polished 26 gauge 304 stainless steel, made in the USA, for the Toyota Highlander from 2014 through 2019. PP14111 is the larger of the two Highlander pillar sets, and its single fitment row, tagged 4-door and SUV, matches the title. The covers mount with 3M automotive-grade acrylic foam tape laid straight over the existing surface, so you won't drill or remove anything.
The pillar decision. PP14110 is the other pillar listing, with four pieces. Neither has a note, neither says which pillars it dresses, and neither mentions a triangle or mirror piece. The photos are your guide here: lay the two galleries side by side, find the shapes that appear in one and not the other, and decide which set covers the posts you have in mind. Settle on a single Highlander set; its photos show what it covers, and we can confirm by phone.
The rest of the Highlander sheet. Six more parts are cross-listed for the same row. HT14110 is a one-piece hood vent trim. LB14110 is a one-piece license plate bar accent. LP14110 is a one-piece license plate bezel. RD14110 is a one-piece rear deck accent; the record gives no exact spot for it on the liftgate, so go by its photos. RW14110 is a two-piece rear window trim. TH14110 is a six-piece lower rocker kit that spans from the bottom of the door up to its listed 1.25-2.00 width. Each listing states its own finish.
No hold claim. The tape is 3M automotive-grade acrylic foam, but this listing doesn't say how long it holds, so neither do we.
Polished 304, briefly. No plated skin, so nothing to flake, and the shine goes all the way through. A 26 gauge sheet sits slim and keeps its shape.
Prepping six pillars. Start with a hand wash using a mild car shampoo. Rinse well and towel dry. Then wipe every pillar with isopropyl alcohol on a lint-free cloth and let it flash off. If you've waxed or coated the Highlander, take that off where tape will land; tape sticks to the top layer.
Layout first. Check the six Highlander covers against the gallery before you start. Post by post, offer each Highlander cover up with its liner on, look along both edges, and adjust until it hugs the post. Mark each end with painter's tape and write the spot on the liner. Map all six, checking similar covers against each other.
Then press. Peel one liner, set the cover between its marks, and press firmly end to end and along each edge. Then the next. Check the Highlander from a few feet back after each pair. The Installation tab gives the temperature range and cure time. A step stool helps with the tops of the pillars.
Conditions. A dry, mild day out of direct sun, or a garage.
Fit and delivery. Highlander, 2014-2019, 4-door. When the box comes, count six covers against the photos. If one won't sit flush, keep the liner on, try a different pillar, and call Quality Automotive Trims at 877-752-3811 with PP14111 if it still won't settle. Afterward, mild soap and a soft cloth.
PP14111 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP14111 |
| UPC | 691821298211 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2019 Toyota Highlander |
Fitment: PP14111
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Highlander | 2014-2019 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2019 Toyota Highlander
- HT14110: 1-piece Hood Vent Trim
- LB14110: 1-piece License Plate Bar Accent
- LP14110: 1-piece License Plate Bezel
- PP14110: 4-piece Pillar Post Trim
- RD14110: 1-piece Rear Deck Accent
- RW14110: 2-piece Rear Window Trim
- TH14110: 6-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP14111 Pillar Post Trim
What does PP14111 fit?
The Toyota Highlander 2014-2019, 4-door SUV.
Do I also need PP14110?
Only one, as a rule. If both Highlander sets appeal, compare the photos or call 877-752-3811 before ordering. Compare photos and choose one.
Does it include a triangle piece?
The listing has no notes and doesn't name one.
Is drilling needed?
No. It installs with 3M automotive-grade acrylic foam tape directly over the existing surface.
Where does RD14110 go?
Its listing names it a rear deck accent and gives no exact spot on the SUV. Check its photos or call 877-752-3811.
