Product Description
Toyota Highlander 2014-2019 Stainless Hood Vent Trim (HT14110)
HT14110 is a one-piece hood trim for the Toyota Highlander 4-door SUV, model years 2014 through 2019, listed on a single six-year Fitment row. The catalog's part type is "Hood Vent Trim," which tells you it's an accent for the vent area of the hood. The Highlander hood trim is polished 304 stainless steel at 26 gauge, made in the USA. The Highlander's hood trim is fixed with 3M automotive-grade acrylic foam tape.
The sheet doesn't give a width or describe the exact outline, so the product photos are your guide to how the trim sits on the hood. Hold it up against your Highlander's hood with the liner still on before doing anything else; the shape should match the vent area clearly. If it doesn't, or you're unsure, call us before installing.
The trim installs directly over the existing surface, so there's no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Look at the paint where the trim will sit and repair any chips, faded or peeling clear coat and blisters first; the tape needs a firm, clean surface.
A single piece on the Highlander's hood is in plain view from behind the wheel, so take care with alignment. Wash the area with soapy water, rinse, dry completely and wipe with a degreaser. Dry-fit the trim, check it from the front bumper and again from inside the cab, and mark its ends with painter's tape. Then peel the liner, place one end on its mark and lower the rest into position, pressing firmly along its full length. Go back over it with firm pressure after a minute. The Installation tab has more detail.
The Highlander sheet lists seven other parts for the same 4-door SUV, most of them at the sides and rear. PP14110 and PP14111 are pillar post sets with four and six pieces. TH14110 is a six-piece lower rocker kit that spans from the bottom of the door up, at 1.25 to 2.00 inches. At the back, RW14110 is a two-piece rear window trim, RD14110 is a one-piece rear deck accent, LB14110 is a one-piece license bar that sits above the plate, and LP14110 is a one-piece license plate bezel. The hood trim is the only front-end piece on this sheet. Check each listing for its finish and photos.
On the 2014-2019 Highlander, polished 304 stainless puts a bright line on the hood, and the 26 gauge sheet keeps it slim. Fit it on a dry, mild day and let the tape set overnight before any wash. After that, mild soap and a soft cloth clean it; keep abrasive pads away.
If you're planning more stainless for the Highlander, the hood trim and the rear pieces pair naturally as front and back accents, while the pillar posts and rocker kit dress the sides. Installing the single hood piece first lets you judge the polished finish against your paint. Confirm your model year before ordering, since the row covers 2014 through 2019 only; your records show it. Questions? Call Quality Automotive Trims at 877-752-3811 and mention HT14110. The UPC is on the Specs tab.
HT14110 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | HT14110 |
| UPC | 691821726677 |
| Part type | Hood Vent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2019 Toyota Highlander |
Fitment: HT14110
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Highlander | 2014-2019 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2019 Toyota Highlander
- LB14110: 1-piece License Plate Bar Accent
- LP14110: 1-piece License Plate Bezel
- PP14110: 4-piece Pillar Post Trim
- PP14111: 6-piece Pillar Post Trim
- RD14110: 1-piece Rear Deck Accent
- RW14110: 2-piece Rear Window Trim
- TH14110: 6-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Hood Vent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: HT14110 Hood Vent Trim
Which Highlander does HT14110 fit?
The 2014-2019 Toyota Highlander 4-door SUV.
Where does it go?
The catalog lists it as hood vent trim. Use the product photos to see its exact position, or call 877-752-3811.
How many pieces are included?
One.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
