Product Description
Toyota Highlander 2014-2019 Rear Window Trim, 2-Piece Polished Stainless (RW14110)
For the Toyota Highlander, model years 2014 through 2019, RW14110 is a pair of polished stainless trim pieces for the rear window area. The record lists the 4-door SUV and two pieces.
Title shorthand
The title writes the years as "2014-19." The fitment spells it out as 2014 through 2019, so both agree on six model years. A Highlander outside that span isn't on this listing.
What isn't recorded
There are no dimensions and no layout note. The data doesn't say whether the pieces run along the sides or the top of the glass, so the product photos are the guide. For measurements, call Quality Automotive Trims at 877-752-3811.
How it's made
Each piece is 26-gauge 304 stainless steel with a mirror polish, made in the USA, and lined with 3M automotive-grade acrylic foam tape for installation over the existing surface. The Highlander keeps all its original trim. QAA states the tape will hold for a lifetime without causing damage to the vehicle surface.
A rear of the SUV, piece by piece
Several linked parts also mount at the rear of this Highlander: RD14110 rear deck accent (on this SUV that's the liftgate), LB14110 above-plate license bar, and LP14110 license plate bezel. With the window trim, that's four separate pieces of rear trim available. If you plan to install more than one, tape them all up together first and judge the spacing before any liner comes off. Check each listing for its finish.
Elsewhere on the vehicle
The record also links HT14110 hood vent trim, PP14110 and PP14111 pillar kits, and TH14110 rocker kit, which spans from the bottom of the door up to its listed width.
Clean the window surround
Wipers, glass cleaners and detail sprays leave films around a rear window. Wash, dry, then wipe each mounting area with a residue-free cleaner, switching cloths, until a fresh one shows nothing.
Placing the two pieces evenly
Hold both pieces in place with their liners on. Use the same reference for each, such as the glass edge, and measure until the two sit evenly. Mark the outlines with painter's tape.
Install
Peel one liner, set the piece on its marks, and press firmly end to end. Do the second the same way, then rub all edges. Dry, mild weather is best; the Installation tab has more.
Top-down order
If you fit the deck accent and license pieces, install the window trim first, then work downward, so your arms never rest on tape that has just been pressed.
Why polished steel up here
The area around rear glass gets wiper runoff, sun and washes year round. Solid 304 holds its mirror finish through that, and because there's no plating, a scratch shows more of the same steel rather than a different metal beneath.
Upkeep
Give it a few days before the first wash, then use mild soap and a soft cloth. Polished 304 carries no plating.
Decorative
It replaces nothing and doesn't change how the liftgate or glass works.
Call 877-752-3811 about Highlander rear window set RW14110, UPC 691821322985.
RW14110 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RW14110 |
| UPC | 691821322985 |
| Part type | Rear Window Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2019 Toyota Highlander |
Fitment: RW14110
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Highlander | 2014-2019 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2019 Toyota Highlander
- HT14110: 1-piece Hood Vent Trim
- LB14110: 1-piece License Plate Bar Accent
- LP14110: 1-piece License Plate Bezel
- PP14110: 4-piece Pillar Post Trim
- PP14111: 6-piece Pillar Post Trim
- RD14110: 1-piece Rear Deck Accent
- TH14110: 6-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Window Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RW14110 Rear Window Trim
Which Highlander years does RW14110 fit?
2014 through 2019, 4-door SUV.
How many pieces?
Two.
What size are they?
The record doesn't list dimensions. Call 877-752-3811.
Does it come with the license bar?
No. LB14110 is a separate linked listing.
How does it attach?
3M tape over the existing surface.
