Product Description
Toyota Highlander 2014-2019 Tapered Lower Rocker Kit, 1.25"-2.00", Six Pieces (TH14110)
TH14110 is a six-piece Lower Kit in polished stainless steel for the Toyota Highlander SUV, model years 2014 through 2019. The width bullet reads "1.25" - 2.00" tapered Width," and the placement note says the trim "Spans from the bottom of the door UP to the specified width." This note doesn't include the words "On the doors only," so the record leaves the exact coverage open.
Six pieces on a four-door
The Highlander is listed as a 4-door SUV, and the kit has six pieces. The record doesn't say where the two further pieces go, or whether some pieces sit beyond the doors themselves. Rather than guess, look carefully at the product photos, and if the layout still isn't clear, call Quality Automotive Trims at 877-752-3811 before ordering. Knowing the layout up front saves time at install.
The taper
The width changes by three-quarters of an inch, from 1.25" at one end to 2.00" at the other. The listing doesn't say which end is wider. Lay the pieces out and compare them with the photos so the top edges flow in the right direction along the Highlander.
Fits
Toyota Highlander, 4-door SUV: 2014, 2015, 2016, 2017, 2018 and 2019.
Materials
The six Highlander pieces are polished 26 gauge 304 stainless, made in the USA, attached over the existing door surface with 3M automotive-grade acrylic foam tape. According to QAA, the tape will hold for a lifetime without harming the SUV.
No rocker strip linked
This Highlander sheet doesn't link a separate on-the-rocker strip, so TH14110 is the rocker panel trim QAA connects to this SUV. Ask if you want something else for the lower body.
Sorting six pieces
Spread the kit on a clean towel. Group the pieces by position using their shapes and the photos, and label each with painter's tape. Dry-fit an entire side, liner on, before peeling any piece, so you can see how the joints and the taper come together.
Clean a generous band
Wash and dry the lower body, then wipe with isopropyl alcohol from the bottom edge up at least three inches. Pay special attention to the bottom edge itself.
Pressing down
Start with the piece you're most confident about. Seat the bottom edge, check clearance by opening and closing the nearby door, peel the liner a few inches at a time, and press along the full width. Work outward from there.
Wait before washing
About a day, and install on a warm, dry day.
Linked Highlander parts
PP14110 and PP14111 pillar kits, RW14110 rear window trim, HT14110 hood vent trim, RD14110 deck accent, LB14110 license bar and LP14110 plate bezel. Check each listing for its finish.
Care
Rinse the lower body after winter drives; clean with mild soap and a non-abrasive polish. Avoid scouring pads.
Supplies
Soapy water, isopropyl alcohol, plenty of lint-free cloths, painter's tape for labeling six pieces, and a ruler to compare the narrow and wide ends.
Highlander owners can quote the six-piece kit TH14110 (UPC 691821722921) at 877-752-3811.
TH14110 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH14110 |
| UPC | 691821722921 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.25" to 2.00" tapered |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2019 Toyota Highlander |
Fitment: TH14110
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Highlander | 2014-2019 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2019 Toyota Highlander
- HT14110: 1-piece Hood Vent Trim
- LB14110: 1-piece License Plate Bar Accent
- LP14110: 1-piece License Plate Bezel
- PP14110: 4-piece Pillar Post Trim
- PP14111: 6-piece Pillar Post Trim
- RD14110: 1-piece Rear Deck Accent
- RW14110: 2-piece Rear Window Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH14110 Rocker Panel Trim, Lower Kit
Where does TH14110 go?
From the bottom of the door up to the specified width, per the note.
Why six pieces?
The record doesn't explain the layout. Check the photos or call 877-752-3811.
How wide is it?
It tapers from 1.25" to 2.00".
Which years fit?
Toyota Highlander 2014 through 2019, 4-door SUV.
Is any door trim removed during installation?
No. It uses 3M automotive-grade acrylic foam tape.
