Product Description
Toyota Highlander 2014-2019 License Bar Accent in Polished Stainless (LB14110)
If you load groceries, gear or kids through the back of your Highlander every day, the liftgate takes more handling than any other panel on it. LB14110 is a single polished stainless strip above the rear license plate, made to stay put through all of that. The listing is for the Toyota Highlander 4-door SUV, model years 2014 through 2019, six years on one row with no exceptions noted.
The part, in plain terms
One piece. The catalog calls it a License Plate Bar Accent. It is 26-gauge 304 stainless steel with a mirror polish, made in the USA. It mounts with 3M automotive-grade acrylic foam tape and installs directly over the existing surface, so you aren't drilling into the liftgate or taking anything apart. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
What the sheet does not give is a width or any note about cutouts or key access. Rather than estimate, use the product photos, which show the shape of the bar and where it sits. If something on your liftgate occupies that space and doesn't appear in the photos, ring Quality Automotive Trims at 877-752-3811 and quote LB14110 before you buy.
Why the prep matters on a liftgate
The area around a plate collects road grime, and on a liftgate it also picks up hand oils every time someone opens it. Tape holds to clean paint, not to film. So wash first, dry fully, and then go over the spot twice with rubbing alcohol on a clean cloth. Let it flash off. Do the job in the shade on a mild day; the Installation tab gives the temperature guidance. Dry-fit with the liner on, step back to check it's level and centered over the plate, mark the ends with painter's tape, then peel and press firmly from the center out. Leave the liftgate closed for the rest of the day so the bond can set.
Other Highlander parts in the catalog
Seven related parts are listed for the same SUV. Around the back there is LP14110, a one-piece license plate bezel; RD14110, a one-piece piece cataloged as a Rear Deck Accent; and RW14110, a two-piece rear window trim. HT14110 is a one-piece hood vent trim. On the sides, PP14110 and PP14111 are pillar post kits of four and six pieces, and TH14110 is a six-piece lower rocker kit listed at 1.25-2.00" that spans up from the bottom of the door. A bar and a bezel can be combined at the plate, but check each listing's photos for finish and fit first.
Why a bar above the plate
The plate sits on the liftgate, and this bar puts polished stainless on the panel above it. One polished strip there draws a clean horizontal line across the Highlander's back without bulk.
Upkeep
Polished stainless needs nothing special. Mild soap, water and a soft towel keep it clean. Keep abrasive pads and polishing compounds with grit off it.
The Fitment, Specs and Installation tabs carry the rest of the details, including the UPC.
LB14110 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB14110 |
| UPC | 691821384020 |
| Part type | License Plate Bar Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2019 Toyota Highlander |
Fitment: LB14110
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Highlander | 2014-2019 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2019 Toyota Highlander
- HT14110: 1-piece Hood Vent Trim
- LP14110: 1-piece License Plate Bezel
- PP14110: 4-piece Pillar Post Trim
- PP14111: 6-piece Pillar Post Trim
- RD14110: 1-piece Rear Deck Accent
- RW14110: 2-piece Rear Window Trim
- TH14110: 6-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bar Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB14110 License Plate Bar Accent
Which Highlander years does LB14110 fit?
2014 through 2019, 4-door SUV.
Will I have to drill the liftgate?
No. It uses 3M automotive-grade acrylic foam tape and goes directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How wide is it?
No width is listed. The photos show the shape, or call 877-752-3811.
Can I pair it with the license plate bezel?
LP14110 is listed for the same Highlander. Check both listings' photos to see how they look together.
How many pieces?
One.
