Product Description
Toyota Highlander 2020-2026 Two-Piece Stainless License Bar (LB70110)
LB70110 fits the newer Toyota Highlander range: the 4-door SUV, model years 2020 through 2026. Unlike a single-strip bar, it comes in two pieces. The catalog calls it a License Plate Bar Accent, and both pieces are 26-gauge 304 stainless steel, polished to a mirror finish and made in the USA.
The layout question
The listing doesn't say how the two pieces are arranged, and there's no width given. Rather than describe a layout we can't confirm, we point you to the product photos, which show the pieces in place. Look at them next to your liftgate. If something above your plate differs from the photos, call Quality Automotive Trims at 877-752-3811 and mention LB70110.
Mounting
Each piece has 3M automotive-grade acrylic foam tape, and both install directly over the existing surface. There's no drilling and no hardware. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Body-style tags on the list
This bar's fitment row tags the Highlander as a 4-door SUV. On the same sheet, the pillar post kits PP70110, PP70111 and PP70109 (four, six and eight pieces) are tagged 4-door Crossover SUV instead. It's the same vehicle and years on every row; only the label differs, and we've flagged it. It doesn't change this bar's fitment.
Working with two pieces
Prepare the area first: soapy water, rinse, dry, then two passes with rubbing alcohol. Check for chips or old badge adhesive. With the liners on, set both pieces as the photos show. The goal is for them to match, so measure each one's distance from the plate and adjust until they agree. Look from straight behind the Highlander and from each rear corner. Mark the ends with painter's tape. Install one piece, recheck the second against it, then install that one. Press both firmly, then again a minute later. Close the liftgate gently for the first day. Temperature notes are on the Installation tab.
More Highlander parts
GC70110 is a one-piece gas door cover trim. HT70110 is a one-piece hood vent trim. LP70110 is a one-piece license plate bezel and RD70110 a one-piece part cataloged as a Rear Deck Accent. WP70110 and WP70111 are named by number only on this sheet. The bezel, the rear accent and this bar all work near the back, so compare their photos together. Check each listing for its finish.
Year check
Seven model years, 2020 to 2026. LB70110's Highlander row runs 2020 to 2026.
Why two pieces
The catalog gives the count without explaining it. Whatever the reason, a two-piece bar asks for a slower, more careful dry fit than a single strip, because both pieces need to match. Allow a few minutes more for it.
For care, mild soap and water with a soft towel is all it needs. Skip scouring pads and gritty polish, which dull a mirror finish. The Fitment and Specs tabs repeat the vehicle row and list the UPC.
LB70110 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB70110 |
| UPC | 840251601614 |
| Part type | License Plate Bar Accent |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2020-2026 Toyota Highlander |
Fitment: LB70110
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Highlander | 2020-2026 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2020-2026 Toyota Highlander
- GC70110: 1-piece Gas Door Cover Trim
- PP70110: 4-piece Pillar Post Trim
- PP70111: 6-piece Pillar Post Trim
- PP70109: 8-piece Pillar Post Trim
- HT70110: 1-piece Hood Vent Trim
- LP70110: 1-piece License Plate Bezel
- RD70110: 1-piece Rear Deck Accent
- WP70110: 14-piece Window Trim Package
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bar Accent
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB70110 License Plate Bar Accent
How many pieces is LB70110?
Two.
How are they arranged?
The catalog doesn't say. Follow the photos or call 877-752-3811.
Which Highlander years does it fit?
2020 through 2026, 4-door SUV.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Is a width listed?
No.
