Product Description
Toyota Grand Highlander 2024-2026 Two-Piece License Bar, Polished Stainless (LB74160)
LB74160 is a two-piece license bar for the Toyota Grand Highlander 4-door SUV, model years 2024 through 2026. Three model years on one row, no trim exclusions. The catalog calls it a License Plate Bar Accent, and both pieces are 26-gauge 304 stainless steel with a mirror polish, made in the USA.
Note the model name. The listing is for the Grand Highlander specifically. Make sure your Grand Highlander falls within that range.
Attachment
Each Grand Highlander piece fixes over the existing surface with 3M automotive-grade acrylic foam tape. No drilling, no fasteners. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Two pieces, layout in the photos
There's no note on how the two pieces are arranged and no width given. The product photos show the layout, and they're what you should follow. Before ordering, compare them with the area above your plate. If something on your liftgate doesn't appear in the photos, call Quality Automotive Trims at 877-752-3811 and mention LB74160.
SUV or crossover?
Small catalog detail, flagged for accuracy: the pillar post kits PP74160, PP74161 and PP74162, in four, six and eight pieces, describe the Grand Highlander as a 4-door Crossover SUV, while this license bar calls it a 4-door SUV. The model and the years match across all of them. Treat it as a labeling inconsistency in our data, not a fitment difference for LB74160.
Fitting the pair
Begin with a bucket of soapy water and a clean towel; get the paint above the plate spotless and fully dry. Follow with rubbing alcohol on a fresh cloth until it comes away clean, and lift off any leftover sticker glue. Now arrange the two pieces, backing still in place, exactly as pictured. Use a tape measure: the gap from each piece to the plate should read the same for both. Painter's tape at the outer ends holds that layout while you work. Stick down the first piece with steady, firm pressure, line the second up to it, and press it home. Run your thumb along both once more after a minute, then go easy on the liftgate for the first day. Temperature limits are on the Installation tab.
Grand Highlander parts on the sheet
TH74160 is a four-piece rocker panel trim. GC74160 is a one-piece gas door cover trim. LP74160 is a one-piece license plate bezel, the part that frames the plate itself, and RD74160 a one-piece part cataloged as a Rear Deck Accent. WP74160 and WP74161 are named by number only here. The bezel, the rear accent and this bar all sit at the back, so compare their photos together. Check each listing for its finish.
Paint check
Look over the paint above the plate in good light for chips or residue, and clear them before any tape goes on.
Care
Mild soap, water and a soft towel. Avoid scouring pads. The Fitment and Specs tabs repeat the row and list the UPC.
LB74160 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB74160 |
| UPC | 840251603236 |
| Part type | License Plate Bar Accent |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2024-2026 Toyota Grand Highlander |
Fitment: LB74160
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Grand Highlander | 2024-2026 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2024-2026 Toyota Grand Highlander
- PP74160: 4-piece Pillar Post Trim
- PP74161: 6-piece Pillar Post Trim
- PP74162: 8-piece Pillar Post Trim
- TH74160: 4-piece Rocker Panel Trim
- GC74160: 1-piece Gas Door Cover Trim
- LP74160: 1-piece License Plate Bezel
- RD74160: 1-piece Rear Deck Accent
- WP74160: 14-piece Window Trim Package
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bar Accent
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB74160 License Plate Bar Accent
Which vehicle does LB74160 fit?
The 2024-2026 Toyota Grand Highlander, 4-door SUV.
How many pieces?
Two.
How are they arranged?
The catalog doesn't say. Follow the photos or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Is a width listed?
No.
