Product Description
Toyota Highlander 2008-2013 License Bar with "HIGHLANDER" Logo Cut Out (LB28110)
There are two license bars for the 2008-2013 Toyota Highlander, and the difference between them is one line in the catalog. LB28110 is noted With "HIGHLANDER" Logo Cut Out. Its sibling LB28111 has the same logo cutout and is listed With smart key access. This page is for LB28110, the version without the smart key access note.
Which one do you need?
The catalog doesn't explain what the smart key access opening is for on LB28111 or where it sits, so we can't tell you from the data alone which bar your Highlander needs. The product photos for each listing show the shapes. Compare both against the area above your plate. If you see a button, sensor or opening there that only the LB28111 photos account for, that is the one to look at. If it's unclear, call Quality Automotive Trims at 877-752-3811 and mention LB28110 before ordering; picking the right version up front is easier than swapping later.
The part
The Highlander piece is cataloged as a License Plate Bar Accent, and is one mirror-polished strip of 26-gauge 304 stainless, made in the USA. It goes on with 3M automotive-grade acrylic foam tape over the existing surface, and QAA says that tape will hold for a lifetime with no damage to the SUV's surface.
A plain-language take
Think of LB28110 as the simpler of the pair. It has one shaped opening, for the lettering, and otherwise runs as a continuous strip. If the area above your plate has nothing but the HIGHLANDER lettering, a bar with one opening keeps the line clean. If there is more going on there, look closely at the other version's photos before you decide.
Fitment
Toyota Highlander, 4-door SUV, 2008 through 2013. Six model years, one row. This bar suits Highlanders made 2008 through 2013.
Using the logo cut out
The opening for the HIGHLANDER lettering is your alignment guide. Clean the area with soap, water and rubbing alcohol, paying attention to the edges of the lettering where residue collects. Dry-fit the bar with the liner on and slide it until the lettering sits evenly inside the cutout. Mark both ends with painter's tape. Peel, align with the marks and the lettering, and press firmly along the length and around the opening. Press again a minute later, then close the liftgate gently for the first day. Temperature guidance is on the Installation tab.
Highlander parts on the same sheet
GC28110 is a one-piece gas door cover trim and LP28110 a one-piece license plate bezel. MI28110 is a four-piece body molding insert kit at 1". PP28110 and PP28111 are pillar post kits of four and six pieces. RD28110 is a one-piece part for the back, cataloged as a Rear Deck Accent, listed at 1.875" wide. SGR28110, SGR28111, WP28110, WP28111 and WS28110 are named by number only on this sheet. Check each listing's photos for its finish.
Care is simple: mild soap, water and a soft towel.
LB28110 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB28110 |
| UPC | 691821522552 |
| Part type | License Plate Bar Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | With "HIGHLANDER" Logo Cut Out |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2008-2013 Toyota Highlander |
Fitment: LB28110
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Highlander | 2008-2013 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2008-2013 Toyota Highlander
- GC28110: 1-piece Gas Door Cover Trim
- LB28111: 1-piece License Bar, Above plate accent Trim
- LP28110: 1-piece License Plate Bezel
- MI28110: 4-piece Molding Insert
- PP28110: 4-piece Pillar Post Trim
- PP28111: 6-piece Pillar Post Trim
- RD28110: 1-piece Rear Deck Accent
- SGR28110: 10-piece "HIGHLANDER" Letter Inserts
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bar Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB28110 License Plate Bar Accent
What is the difference between LB28110 and LB28111?
Both have the "HIGHLANDER" logo cut out. LB28111 has smart key access, and LB28110 doesn't. Compare the photos or call 877-752-3811.
Which years does it fit?
2008 through 2013 Toyota Highlander, 4-door SUV.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How wide is it?
No width is listed.
How many pieces?
One.
