Product Description
Toyota Highlander 2008-2013 Polished Stainless License Plate Bezel (LP28110)
LP28110 frames the plate area on the Toyota Highlander 4-door SUV, model years 2008 through 2013. The single fitment row lists six years and no trim exclusions. It is a one-piece License Plate Bezel cut from 26-gauge 304 stainless steel, mirror polished and made in the USA.
One bezel, two license bars
Shoppers for this Highlander will notice two license bars on the same sheet, and both are worth understanding before choosing a bezel. LB28110 is a one-piece License Plate Bar Accent with a "HIGHLANDER" logo cut out. LB28111 is the same type of part with the same logo cut out, plus With smart key access. So the difference between the two bars, according to the catalog, is the smart key access note. Those notes belong to the bars. LP28110's listing has no notes at all, so it says nothing either way about logo or key openings on the bezel. The product photos show its outline; compare them with the area around your plate. If you're planning a bar and the bezel together, view the photos side by side, and if you're unsure which bar suits your vehicle, call Quality Automotive Trims at 877-752-3811 and mention LP28110 along with the bar you're considering.
Fitting it
The bezel mounts with 3M automotive-grade acrylic foam tape and goes directly over the existing surface, without drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Look the paint over and repair any chips or lifting clear coat first. Wash, dry and wipe with rubbing alcohol, then dry-fit with the liner on and mark the spot with painter's tape before peeling and pressing. The Installation tab gives the steps in order, along with the temperature range.
Highlander parts with sizes
RD28110 is a one-piece Rear Deck Accent at 1.875", which, like this bezel and the bars, is cataloged for the back of the vehicle. MI28110 is a four-piece body molding insert kit at 1". GC28110 is a one-piece gas door cover trim, and PP28110 and PP28111 are pillar post kits with four and six pieces. SGR28110, SGR28111, WP28110, WP28111 and WS28110 are cross-listed by number only. Check each listing for its finish.
No dimensions listed
The catalog doesn't give a size for the bezel, so measurements can't settle the fit. The photos and a quick look at your own vehicle are the way to confirm it.
Order of work
If a bar is going on too, dry-fit both before peeling either liner, so you can see the spacing between them with the plate in place. Once both look right, apply the bezel first, then the bar, checking the gap again before the second liner comes off.
Before you order
Check that your records show a Highlander from 2008 to 2013. Refit any plate frame during the dry fit to make sure it doesn't overlap the bezel. Clean with mild soap and water and a soft towel.
LP28110 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP28110 |
| UPC | 691821739479 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2008-2013 Toyota Highlander |
Fitment: LP28110
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Highlander | 2008-2013 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2008-2013 Toyota Highlander
- GC28110: 1-piece Gas Door Cover Trim
- LB28110: 1-piece License Plate Bar Accent
- LB28111: 1-piece License Bar, Above plate accent Trim
- MI28110: 4-piece Molding Insert
- PP28110: 4-piece Pillar Post Trim
- PP28111: 6-piece Pillar Post Trim
- RD28110: 1-piece Rear Deck Accent
- SGR28110: 10-piece "HIGHLANDER" Letter Inserts
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP28110 License Plate Bezel
Which Highlander does LP28110 fit?
The 2008-2013 Toyota Highlander 4-door SUV.
What's the difference between LB28110 and LB28111?
Both are license bars with a "HIGHLANDER" logo cut out; LB28111 is the one with smart key access.
Does the bezel have a logo cut out?
Its listing doesn't say. Check the photos or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
