Product Description
Toyota Highlander 2014-2019 License Plate Bezel, Polished 304 Stainless (LP14110)
LP14110 is the License Plate Bezel for the Toyota Highlander 4-door SUV, model years 2014 through 2019. That is six years on one fitment row with no trim exclusions noted. The bezel is a single piece of 26-gauge 304 stainless steel, mirror polished and made in the USA, and it outlines the plate area so the back of the SUV picks up a clean, bright border.
Bezel or bar, or both?
This Highlander also has LB14110 on the same sheet, a one-piece License Bar described as an Above plate accent Trim. The two parts are easy to confuse, so here is the difference in the catalog's own terms: the bar is an accent that sits above the plate, while LP14110 is the bezel that frames the plate area itself. Some owners choose one; others want both for a fuller look at the rear. Neither listing gives dimensions, so if you plan to run them together, look at both sets of product photos side by side and picture how they line up on your SUV. If the spacing is a question, call Quality Automotive Trims at 877-752-3811 and mention LP14110 and LB14110.
Mounting
There's no drilling. The bezel uses 3M automotive-grade acrylic foam tape and installs directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Good adhesion comes from a clean, dry, wax-free surface, so remove the plate, wash and dry the area, then wipe it with rubbing alcohol. Dry-fit the bezel with the liner on, step back to judge the margins, and mark the position with painter's tape. Peel, place, and press firmly around the whole frame, then go around a second time. The Installation tab lists the temperature range for the tape.
Rest of the Highlander list
Beyond the bar, five more parts share this SUV's fitment. HT14110 is a one-piece Hood Vent Trim. RD14110 is a one-piece Rear Deck Accent. RW14110 is a two-piece Rear Window Trim. PP14110 and PP14111 are pillar post kits of four and six pieces. TH14110 is a six-piece lower rocker kit that spans from the bottom of the door up to a width between 1.25" and 2.00". Check each listing for its finish.
Before you order
Check your model year; it should be between 2014 and 2019. The catalog lists no cutouts for the bezel, so compare the photos with the area around your plate, including any lock, emblem or camera. If your rear doesn't match, a phone call is quicker than a return.
Why begin with the bezel? It is one piece in one place, and seeing polished stainless against your paint color in daylight is the easiest way to decide whether the pillar or rocker kits belong on the same SUV.
A license plate frame can overlap a bezel, so if you use one, refit it during the dry fit. Afterward, wash the polished stainless with mild soap and water and dry it with a soft towel.
LP14110 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP14110 |
| UPC | 691821731756 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2019 Toyota Highlander |
Fitment: LP14110
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Highlander | 2014-2019 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2019 Toyota Highlander
- HT14110: 1-piece Hood Vent Trim
- LB14110: 1-piece License Plate Bar Accent
- PP14110: 4-piece Pillar Post Trim
- PP14111: 6-piece Pillar Post Trim
- RD14110: 1-piece Rear Deck Accent
- RW14110: 2-piece Rear Window Trim
- TH14110: 6-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP14110 License Plate Bezel
What's the difference between LP14110 and LB14110?
LP14110 is a License Plate Bezel that frames the plate area. LB14110 is a License Bar, an above-plate accent. Both are one piece and listed for the 2014-2019 Highlander.
Which years does it fit?
Toyota Highlander 4-door SUV, 2014 through 2019.
Does it need drilling?
No. It uses 3M automotive-grade acrylic foam tape directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Are dimensions listed?
No. See the photos or call 877-752-3811.
What is it made of?
26-gauge 304 stainless steel, mirror polished, made in the USA.
