Product Description
Liftgate Accent for the 2014-2019 Toyota Highlander, One-Piece Stainless (RD14110)
The Toyota Highlander does not have a trunk, but QAA files this strip as a rear deck accent, and on the Highlander that means the liftgate. RD14110 is one piece of polished 304 stainless steel for the 4-door SUV from 2014 through 2019, made in the USA and mounted with 3M tape.
Six model years
The record lists the Highlander for 2014, 2015, 2016, 2017, 2018, and 2019. Highlanders from other years have their own parts, so confirm yours before ordering.
No measurement on file
The catalog does not give a width or length for RD14110. That is a reason to spend a minute with the photos, which show its shape and where it sits on the gate. If you need a dimension, call and ask.
A rear that can be fully dressed
This Highlander has a fuller set of rear pieces than many SUVs in the catalog:
- LB14110, a license bar above the plate
- LP14110, a license plate bezel
- RW14110, a two-piece rear window trim
Fit this liftgate accent and the back of the vehicle gets polished metal at several levels, from the glass down to the plate.
Hood and sides
HT14110 is a one-piece hood vent trim. The pillar kits are PP14110 with four pieces and PP14111 with six. TH14110 is a six-piece lower rocker kit with a width from 1.25 to 2.00 inches, spanning up from the bottom of the door.
Material
Each piece in this lineup, including RD14110, is 26-gauge 304 stainless with a mirror polish. There is no plating, so the finish cannot peel.
Tape, not screws
The Highlander trim is held by 3M automotive-grade acrylic foam tape against the existing liftgate surface. QAA states the tape keeps hold for a lifetime and won't damage the Toyota.
Cleaning a liftgate
Liftgates gather fingerprints and grime from being opened by hand. Wash the gate, dry it, then wipe the strip's footprint with a residue-free cleaner. Fix chips before installing.
Placement
With the liner still on, hold the strip in position and check it against the photos. Measure from each end to the edges of the gate and mark a line with painter's tape. Close the gate and step back to judge it level before you commit. Then, on a dry, mild day, peel and press from the center to each end.
Which piece first
If you are doing the rear window trim, license bar, and bezel too, start at the top and work down so each piece can be eyeballed against the one above it. Lay all of them out on a towel first and confirm you have what you expect before any liner comes off. Doing the rear in one session also means every piece's tape cures under the same weather, which makes it easy to plan the first wash.
Care
Let it cure a few days before washing, then use mild soap and a soft towel. The Installation tab has the full steps.
Part details
Highlander deck trim RD14110 (UPC 691821311040): sizing questions go to Quality Automotive Trims at 877-752-3811.
RD14110 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD14110 |
| UPC | 691821311040 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2014-2019 Toyota Highlander |
Fitment: RD14110
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Highlander | 2014-2019 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2014-2019 Toyota Highlander
- HT14110: 1-piece Hood Vent Trim
- LB14110: 1-piece License Plate Bar Accent
- LP14110: 1-piece License Plate Bezel
- PP14110: 4-piece Pillar Post Trim
- PP14111: 6-piece Pillar Post Trim
- RW14110: 2-piece Rear Window Trim
- TH14110: 6-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD14110 Rear Deck Accent
Does RD14110 fit my Highlander?
It is listed for the Toyota Highlander 4-door SUV, model years 2014 through 2019.
Where does it go on an SUV?
On the liftgate. QAA calls it a rear deck accent.
How wide is it?
The catalog does not list a width. Check the photos or call.
What else goes on the rear?
LB14110 license bar, LP14110 license plate bezel, and RW14110 rear window trim.
How does it mount?
With 3M automotive-grade acrylic foam tape.
