Product Description
Toyota Highlander 2020-2026 Stainless Hood Vent Trim (HT70110)
For the Toyota Highlander 4-door SUV built for model years 2020 through 2026, HT70110 is the one-piece hood vent trim, listed on a seven-year Fitment row. Earlier Highlander years aren't on this row, so confirm your year first. For the 2020-and-later Highlander, the hood trim is a polished 26-gauge 304 stainless piece made in the USA. It sticks to the hood with 3M automotive-grade acrylic foam tape.
No width or outline is given in the catalog, so look at the product photos to see how the trim frames the vent area on your hood. Hold it against your hood with the liner still attached before you clean anything; the match should be clear. If it isn't, call us.
Mounting needs no drilling. The trim installs directly over the existing surface, and QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Check the paint on the hood where the trim will sit, and repair chips, peeling clear coat or blisters first. The tape bonds directly to the finish, so it can only be as secure as the paint underneath; a few minutes spent on inspection now saves trouble later.
With the surface sound, wash it with soapy water, rinse, dry completely and wipe with a degreaser. Lay the trim in place with the liner on and check it twice, once from the front of the SUV and once seated inside, adjusting until it looks straight. Mark both ends with painter's tape. Peel the liner, set one end on its mark and lay the rest down, pressing firmly along the whole piece. Go over it again with firm pressure after a minute. The Installation tab has more detail.
The Highlander sheet lists nine other parts, all for the 4-door. GC70110 is a one-piece gas door cover trim. Pillar post trim comes in three sizes: PP70110 with four pieces, PP70111 with six and PP70109 with eight. Those pillar sets carry a "Crossover SUV" tag while the hood trim says "SUV," a tagging difference we've noted; it's the same Highlander. At the rear, LB70110 is a two-piece license bar that sits above the plate, LP70110 is a one-piece license plate bezel, and RD70110 is a one-piece rear deck accent. WP70110 and WP70111 are listed by number only. Check each listing for its finish and photos.
Polished 304 stainless gives the hood a bright accent, and 26 gauge keeps it slim. Install on a dry, mild day and let the tape set overnight before washing. Afterward, clean with mild soap and a soft cloth, and avoid abrasive pads.
A single hood piece is a short job for one person, and it sits in your line of sight through the windshield, which makes it a satisfying first upgrade. For stainless at both ends of the Highlander, the hood trim and the rear plate-area pieces pair naturally, with the pillar posts between them. Before ordering, check that your Highlander's year is in the listed range. Questions? Call Quality Automotive Trims at 877-752-3811 and mention HT70110. The UPC is on the Specs tab.
HT70110 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | HT70110 |
| UPC | 840251601607 |
| Part type | Hood Vent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2020-2026 Toyota Highlander |
Fitment: HT70110
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Highlander | 2020-2026 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2020-2026 Toyota Highlander
- GC70110: 1-piece Gas Door Cover Trim
- PP70110: 4-piece Pillar Post Trim
- PP70111: 6-piece Pillar Post Trim
- PP70109: 8-piece Pillar Post Trim
- LB70110: 2-piece License Plate Bar Accent
- LP70110: 1-piece License Plate Bezel
- RD70110: 1-piece Rear Deck Accent
- WP70110: 14-piece Window Trim Package
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Hood Vent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: HT70110 Hood Vent Trim
Which Highlander does HT70110 fit?
The 2020-2026 Toyota Highlander 4-door SUV.
Where does it go?
The catalog lists it as hood vent trim. Use the product photos for its exact position, or call 877-752-3811.
How many pieces are included?
One.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
