Product Description
Highlander Pillar Trim, 6 Pieces, Mirror Stainless, Fits 2020-2026 (PP70111)
PP70111 is the middle option among QAA's Toyota Highlander pillar kits: six polished stainless steel covers, listed for the 4-door Highlander crossover SUV, model years 2020 through 2026.
Middle of three
The four-piece PP70110 and eight-piece PP70109 bracket this kit, and all three share fitment. QAA's data lists piece counts but does not describe coverage, so the listing photos are where to see the differences. Six is a good fit for owners who want visible brightwork without the fullest set.
Pillar kit or window package?
QAA links two window trim packages to this part. WP70110 is a fourteen-piece full package with upper trim and pillar posts. WP70111 is a six-piece package that has upper trim but no pillar posts. Note that WP70111 and this pillar kit both have six pieces but are different products: one is for the upper window trim, the other for the pillars.
Related Highlander trim
Also in the family: GC70110 gas door cover trim, HT70110 hood vent trim, LB70110 license bar accent, LP70110 license plate bezel, and RD70110 rear deck accent accent.
About the steel
All six covers are made in the USA from 304 stainless steel at 26 gauge and polished to a mirror finish. Because there is no plating, the finish is consistent across every piece.
Attachment
For the Highlander, the six covers use 3M automotive-grade acrylic foam tape and go straight onto the existing surface, with no parts removed. QAA says this tape lasts a lifetime without harming the Toyota.
Install steps
- Wash and dry each pillar; wipe off wax.
- Hold each Highlander cover in place to check it.
- Peel, then press each one along its length.
- Check each cover before fitting the next.
- No wash for a few days.
Dry, mild weather is best. The Installation tab has more detail.
What the pillars are
The pillars are the upright posts that frame the side windows and support the roof. Polished covers turn those posts into a bright outline around the glass. The trim is decorative only and sits over the factory surface, which is left as it was.
A tip for even results
Start with one Highlander cover and use it as your reference for the rest. Step back after each piece and look along the side of the Highlander. If something does not look right during the dry-fit, compare it with the photos on this page before pressing; tape is hard to reposition once it bonds.
Fitment recap
Toyota Highlander, 4-door crossover SUV, 2020 through 2026. The Fitment tab shows the record.
Care
Rinse grit away, wash gently with mild soap, and dry with a soft towel. Avoid abrasive products on the polished faces.
Choosing six
Six covers make the stainless clearly visible from across a parking lot, yet stop short of the fullest set. It is a common choice for owners who want a noticeable upgrade and like a balanced look. If you are unsure, line up the photos of the four, six, and eight-piece listings and picture each on your own Highlander.
Reference
Part number PP70111, UPC 840251601478. Call Quality Automotive Trims at 877-752-3811 with questions about fit or choosing a kit.
PP70111 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP70111 |
| UPC | 840251601478 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2020-2026 Toyota Highlander |
Fitment: PP70111
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Highlander | 2020-2026 | 4-door, Crossover SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2020-2026 Toyota Highlander
- GC70110: 1-piece Gas Door Cover Trim
- PP70110: 4-piece Pillar Post Trim
- PP70109: 8-piece Pillar Post Trim
- HT70110: 1-piece Hood Vent Trim
- LB70110: 2-piece License Plate Bar Accent
- LP70110: 1-piece License Plate Bezel
- RD70110: 1-piece Rear Deck Accent
- WP70110: 14-piece Window Trim Package
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP70111 Pillar Post Trim
How many pieces are in PP70111?
Six polished stainless steel pillar covers.
Which Highlander years does it fit?
2020 through 2026, 4-door crossover SUV.
Is WP70111 the same thing?
No. WP70111 is a six-piece upper window trim package with no pillar posts. PP70111 is pillar trim.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing damage to the vehicle.
Who do I call?
Quality Automotive Trims at 877-752-3811.
