Product Description
Stainless Above-Plate License Bar for the 2012-2014 Toyota Camry Sedan, 1 Piece (LB12130)
LB12130 is one strip of polished stainless above the rear license plate of the 2012-2014 Toyota Camry 4-door sedan. QAA catalogs it as a License Bar, Above plate accent Trim, one piece, made in the USA from 26-gauge 304 stainless steel with a mirror finish.
Three years, one body style
The fitment row is narrow: Toyota Camry, 4-door sedan, 2012, 2013 and 2014 only. That makes the model year the first thing to confirm, and your records will show it. If your Camry falls outside those three years, this listing doesn't cover it, so call us.
What the sheet leaves out
There's no width and no key access note on this listing. The product photos are the best reference for the bar's size and outline. Compare them with the area above your plate, and if anything sits there that the photos don't show, call before ordering.
Mounting
The bar uses 3M automotive-grade acrylic foam tape and installs directly over the existing surface, so you won't drill or remove anything. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Getting a single bar level is mostly about patience. Clean the area with soap and water, follow with rubbing alcohol, and let it dry fully. Position the bar with the liner on and check from a few steps behind the car. Two short strips of painter's tape at the ends make good guides. Peel the liner, line the bar up with the tape, and press firmly from the middle toward both ends. Close the trunk gently for the rest of the day, and hold off on washing the car until the tape has had time to bond fully. The Installation tab has notes on temperature.
Companion parts for this Camry
The sheet cross-lists fifteen parts. Near the bar, LP12130 is a one-piece license plate bezel and RD12130 a one-piece rear deck accent at 1.25". At the front, two grille accents differ by width: SG12130 is noted "1.875" Width Lower Airdam, wide," and SG12131 "1" Width Lower Airdam, narrow." For the doors there are four handle accent kits; DH12132 (eight pieces) and DH12133 (four pieces) are noted "Includes smart key access," while DH12130 and DH12131 carry no such note. MC12130 is a two-piece mirror cover set noted "Top Half only." Other listings include GC12130, a gas door cover; PP12130 and PP12131, pillar post kits in four and six pieces; RI12130, a two-piece roof insert at 0.5"; TH12130, a four-piece lower rocker kit "With trim crease"; and WQ12130, a four-piece wheel well accent at 0.875". Check each listing's photos and notes before ordering.
Care
Polished 304 stainless has its shine in the steel, so care is simple: mild soap, water, a soft towel. Avoid abrasive pads.
Questions? Call Quality Automotive Trims at 877-752-3811 and mention LB12130. The UPC is on the Specs tab. Specs repeats these details for LB12130. Our team at Quality Automotive Trims is happy to go over the Camry with you.
LB12130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB12130 |
| UPC | 691821478569 |
| Part type | License Bar, Above plate accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2012-2014 Toyota Camry |
Fitment: LB12130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2012-2014 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2012-2014 Toyota Camry
- DH12130: 8-piece Door Handle Accent Trim
- DH12131: 4-piece Door Handle Accent Trim
- DH12132: 8-piece Door Handle Accent Trim
- DH12133: 4-piece Door Handle Accent Trim
- GC12130: 1-piece Gas Door Cover Trim
- LP12130: 1-piece License Plate Bezel
- MC12130: 2-piece Mirror Cover Set
- PP12130: 4-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar, Above plate accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB12130 License Bar, Above plate accent Trim
Which Camry does LB12130 fit?
The 2012-2014 Toyota Camry 4-door sedan.
How wide is it?
The catalog doesn't list a width. See the product photos.
Does it have key access?
The listing doesn't mention key access. Compare the photos with your car or call 877-752-3811.
How does it attach?
With 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Is there a matching license plate bezel?
LP12130 is a one-piece license plate bezel listed for the same Camry.
