Product Description
Toyota Camry 2012-2014 Stainless License Plate Bezel (LP12130)
On a 2012, 2013 or 2014 Toyota Camry sedan, LP12130 puts a polished stainless frame around the rear plate. It's one piece, cataloged as License Plate Bezel, and the fitment row lists the Camry 4-door sedan for those three model years with no trim exclusions.
Bezel and bar on the same Camry
The list for this Camry includes LB12130, a one-piece license bar cataloged as License Bar, Above plate accent Trim. That gives you two options at the plate: a bar that runs above it, and this bezel that frames it. You can use either one alone or both together. The catalog doesn't describe how the two sit relative to each other, so compare both listings' photos with your trunk before deciding. Neither listing gives dimensions or cutout notes.
Specs
The 2012-2014 Camry bezel is made in the USA from 26-gauge 304 stainless steel with a mirror polish. It mounts with 3M automotive-grade acrylic foam tape over the existing surface, with no drilling, and QAA says that tape will hold for a lifetime without damaging the sedan's surface.
Questions before ordering
Does the year match? The listing covers 2012 to 2014 only; check your records. Does the plate area match the photos? Look for a lock, emblem, lights or camera near the plate. If either answer is uncertain, call Quality Automotive Trims at 877-752-3811 and mention LP12130.
Installation
Unscrew the plate and set it aside. Clean the area with soap and water, rinse, dry, and wipe with rubbing alcohol, getting into the corners. Check for chips or leftover adhesive from an old frame or sticker. With the liner on, hold the bezel in place and look from behind the car for even margins. Mark a few points with painter's tape. Peel, align, and press firmly around the whole frame; then go around once more. Refit the plate and close the trunk gently for the first day. The Installation tab lists the temperature range.
The full Camry list
Fifteen parts in total are cross-listed. Four door handle kits differ in count and key access: DH12130 is eight pieces and DH12131 four, with no key note, while DH12132 (eight) and DH12133 (four) each Include smart key access. GC12130 is a one-piece gas door cover trim, and MC12130 a two-piece mirror cover set noted Top Half only. PP12130, PP12131, RD12130, RI12130, SG12130, SG12131, TH12130 and WQ12130 are named by number only on this sheet; open each listing for details. Check every listing's photos for finish.
Plate frames
If you use a separate frame on the plate, refit it during the dry fit and confirm it won't sit on top of the bezel.
Paint on an older Camry
Sedans from these years have usually seen plenty of washes and waxes. Before the tape goes on, look closely for chips and lifting clear coat near the plate, and remove any wax film with a second alcohol wipe. Sound, clean paint is what the tape needs.
Keeping it bright
Wash with mild soap and water, then dry with a soft towel. Skip abrasive pads.
LP12130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP12130 |
| UPC | 691821630738 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2012-2014 Toyota Camry |
Fitment: LP12130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2012-2014 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2012-2014 Toyota Camry
- DH12130: 8-piece Door Handle Accent Trim
- DH12131: 4-piece Door Handle Accent Trim
- DH12132: 8-piece Door Handle Accent Trim
- DH12133: 4-piece Door Handle Accent Trim
- GC12130: 1-piece Gas Door Cover Trim
- LB12130: 1-piece License Bar, Above plate accent Trim
- MC12130: 2-piece Mirror Cover Set
- PP12130: 4-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP12130 License Plate Bezel
Which Camry years does LP12130 fit?
2012 through 2014, 4-door sedan.
Can I use it with the license bar LB12130?
Yes, both are listed for this Camry. Compare their photos to see how they sit together.
Are dimensions listed?
No. See the photos or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
