Product Description
Toyota Camry 2018-2024 Stainless License Plate Bezel (LP18130)
LP18130 is a polished stainless License Plate Bezel for the Toyota Camry 4-door sedan, and its fitment row spans seven model years, 2018 through 2024. There are no trim exclusions on that row, which is worth pointing out because one of the other Camry parts on the sheet does carry a trim restriction. More on that below.
Part details
One piece, made in the USA from 26-gauge 304 stainless steel, mirror polished. It frames the plate area. The catalog lists no dimensions and no cutout notes, so check the product photos against the area around your plate, including any lock, emblem or lights, before you buy. If the outline doesn't seem to match your car, call Quality Automotive Trims at 877-752-3811 and mention SKU LP18130.
Pairing it with the license bar
LB18130 is a one-piece License Bar, Above plate accent Trim for the same sedan, and unlike this bezel it has a width on file: 1.19". The bar is an accent above the plate, while LP18130 outlines the plate area, so they can be fitted together or on their own. If you want both, look at the two sets of photos side by side to judge the spacing, since the bezel's own size isn't listed.
The restriction that belongs to SG18130
SG18130, a one-piece Front Grille Accent Trim on this sheet, is tagged only fits L, LE, XLE, L Hybrid, LE Hybrid, XLE Hybrid. That limitation is on the grille accent's row, not on this bezel's. LP18130 is listed for the Camry 4-door sedan from 2018 to 2024 without any trim list, so the grille note doesn't narrow its fitment.
Other Camry parts
AT18130 is a thirteen-piece body side molding accent at 0.75". Pillar post kits come in four, six and eight pieces as PP18130, PP18131 and PP18132. RD18130 is a one-piece Rear Deck Accent, the other part on this list cataloged for the back of the car. Check each listing for its finish. With a thirteen-piece molding kit on the list, the single bezel is the easy way to see how polished stainless looks on your paint before taking on a bigger job.
Install notes
The bezel mounts with 3M automotive-grade acrylic foam tape and installs directly over the existing surface, so there's no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Take off the plate, wash and dry the area, and wipe it with rubbing alcohol. Check for chips, flaking clear coat or residue from an old frame and fix it. Hold the bezel in place with its liner on and look at it from behind the car to check it's square, then mark it with painter's tape. Peel, place and press firmly around the frame, then press once more. Follow the temperature range on the Installation tab.
If a plate frame is part of your setup, refit it during the dry fit to make sure it clears the bezel. Before ordering, check your Camry's year against the listed range. Clean the stainless with mild soap and water and a soft towel.
LP18130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP18130 |
| UPC | 691821443741 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2018-2024 Toyota Camry |
Fitment: LP18130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2018-2024 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2018-2024 Toyota Camry
- PP18130: 4-piece Pillar Post Trim
- PP18131: 6-piece Pillar Post Trim
- PP18132: 8-piece Pillar Post Trim
- LB18130: 1-piece License Bar, Above plate accent Trim
- AT18130: 13-piece Body Side Molding Accent Trim
- SG18130: 1-piece Front Grille Accent Trim
- RD18130: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP18130 License Plate Bezel
Which Camry does LP18130 fit?
The 2018-2024 Toyota Camry 4-door sedan, with no trim exclusions listed.
Does the L, LE, XLE restriction apply to this bezel?
No. That note is on the SG18130 grille accent only.
What's the difference from LB18130?
LB18130 is a License Bar above the plate, 1.19" wide. LP18130 is the bezel that frames the plate area; its dimensions aren't listed.
How does it mount?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Questions about fit?
Call 877-752-3811 with SKU LP18130.
