Product Description
Toyota Camry 2018-2024 Stainless License Bar, 1.19" Wide (LB18130)
LB18130 fits the Toyota Camry 4-door sedan from 2018 through 2024, seven model years on one listing. It is a single bar of polished 304 stainless steel that sits above the rear license plate, and the catalog gives its width as 1.19". That is a little over an inch of bright metal across the trunk, centered over the plate.
For the 2018-2024 Camry, the bar is 26-gauge stainless, mirror polished and made in the USA. It mounts with 3M automotive-grade acrylic foam tape over the existing surface without drilling, and QAA says that tape will hold for a lifetime with no damage to the sedan's surface.
No trim exclusions on this part
The fitment row for LB18130 lists the Camry sedan without any trim-level limit. That's worth noting because one part on the same Camry list does carry a restriction: SG18130, a one-piece front grille accent, is marked only fits L, LE, XLE, L Hybrid, LE Hybrid, XLE Hybrid. That restriction belongs to the grille piece and not to this bar. If you are planning both, check the grille listing against the trim name on your car.
What isn't listed
The catalog doesn't mention a key, camera or emblem cutout on this bar, and it doesn't give a length. Use the product photos to see the shape and its position above the plate, and compare them with your trunk lid. If anything on your Camry sits in that space and isn't in the photos, call Quality Automotive Trims at 877-752-3811 with LB18130 before ordering.
Install it like this
Pick a warm, dry day; the Installation tab lists the temperature range. Wash the area, rinse, dry, and wipe with rubbing alcohol. Set the bar in place with the liner on, then judge it from behind the car at standing height. Put painter's tape marks at both ends. Peel the liner, line up with your marks, and press firmly from the center to each end. Remove the marks and press again. Close the trunk gently for the first day.
The rest of the Camry list
Seven other parts are cross-listed for this sedan. PP18130, PP18131 and PP18132 are pillar post kits of four, six and eight pieces. AT18130 is a thirteen-piece body side molding accent kit at 0.75". RD18130 is a one-piece part cataloged as Rear Deck Accent, and LP18130 is a one-piece license plate bezel. A bezel frames the plate; this bar sits above it. Check each listing's photos for its finish and placement.
Seeing 1.19" before you buy
Width is the detail that decides whether a bar looks subtle or bold. Lay a tape measure against the trunk just above the plate and look at a band slightly wider than an inch from a few steps back. Compare it with the 0.75" figure listed for the AT18130 side molding kit if you plan to run both; the catalog lists them at different widths. The photos show the overall look.
Care
Mild soap, water and a soft towel keep the polish bright. Avoid steel wool and abrasive compounds.
LB18130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB18130 |
| UPC | 691821716333 |
| Part type | License Bar, Above plate accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.19" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2018-2024 Toyota Camry |
Fitment: LB18130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2018-2024 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2018-2024 Toyota Camry
- PP18130: 4-piece Pillar Post Trim
- PP18131: 6-piece Pillar Post Trim
- PP18132: 8-piece Pillar Post Trim
- AT18130: 13-piece Body Side Molding Accent Trim
- SG18130: 1-piece Front Grille Accent Trim
- RD18130: 1-piece Rear Deck Accent
- LP18130: 1-piece License Plate Bezel
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar, Above plate accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB18130 License Bar, Above plate accent Trim
How wide is LB18130?
1.19".
Does it fit every Camry trim from 2018-2024?
The listing names the 4-door sedan with no trim exclusion. The trim limit on the list applies to the SG18130 grille accent, not this bar.
Is there a key or camera cutout?
None is listed. Check the photos or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
