Product Description
QAA AT18130: 13-Piece Stainless Side Molding Accent Trim for the 2018-2024 Toyota Camry Sedan
Thirteen pieces at three-quarters of an inch wide: that combination tells you AT18130 is a detailed kit. QAA cut this body side molding accent for the 4-door Toyota Camry sedan built from 2018 through 2024, and it runs a slim line of polished stainless steel along the sides of the car. At 0.75", the narrow strip reads as a crisp pinstripe on the Camry's doors without overpowering them.
Why so many pieces?
The higher piece count means the accent is broken into many shaped segments rather than a few long strips. QAA does not publish where each of the thirteen pieces goes, and we will not guess. The product photos show the layout on the car, and they are the best way to picture the finished look. If something in the photos is unclear, call us before ordering, and we will walk through the layout with you.
Material
Every piece is made in the USA from 26-gauge 304 stainless steel and polished to a mirror shine. There is no chrome plating involved; the brightness is the steel. Grade 304 is a widely used stainless for exterior trim, and 26 gauge is the thickness of the sheet.
Installation
QAA pre-applies 3M automotive-grade acrylic foam tape to the back of each piece, and the kit installs directly over the existing surface of the Camry. You will not drill, and nothing comes off the car. QAA states the tape will hold for a lifetime without causing any damage to the vehicle's surface. With thirteen pieces, organization helps. Lay them out in order on a clean towel, match each one to its spot using the photos, and dry-fit the whole side before peeling a single liner. Work in the shade on clean, dry panels. The Installation tab has a checklist.
Other Camry trim from QAA
The QAA catalog for the 2018-2024 Camry includes pillar post kits in four, six, and eight pieces, a license plate bezel, a license bar that sits above the plate at 1.19" wide, and a rear deck accent. There is also a front grille accent, SG18130, but note its listing restriction: QAA says it only fits the L, LE, XLE, L Hybrid, LE Hybrid, and XLE Hybrid trims. The side accent itself carries no trim restriction in the catalog. Every companion part is linked in the Fitment tab.
Model years
QAA lists the kit for the 4-door Camry sedan across seven years: 2018, 2019, 2020, 2021, 2022, 2023, and 2024. A run that long covers a lot of cars on the road, whether you bought yours new or used. The Fitment tab shows the single row exactly as QAA catalogs it, with the body style listed.
Have questions?
Call Quality Automotive Trims at 877-752-3811. Have your model year and part number AT18130 ready and we will confirm the fit. The UPC, width, and mounting details are in the Specs tab, and the FAQ tab answers common questions.
AT18130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | AT18130 |
| UPC | 691821710478 |
| Part type | Body Side Molding Accent Trim |
| Pieces in kit | 13 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.75" |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2018-2024 Toyota Camry |
Fitment: AT18130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2018-2024 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2018-2024 Toyota Camry
- PP18130: 4-piece Pillar Post Trim
- PP18131: 6-piece Pillar Post Trim
- PP18132: 8-piece Pillar Post Trim
- LB18130: 1-piece License Bar, Above plate accent Trim
- SG18130: 1-piece Front Grille Accent Trim
- RD18130: 1-piece Rear Deck Accent
- LP18130: 1-piece License Plate Bezel
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Side Molding Accent Trim
- Unpack all 13 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: AT18130 Body Side Molding Accent Trim
Which Camry does AT18130 fit?
The 2018 to 2024 Toyota Camry, 4-door sedan.
How many pieces are there, and how wide?
Thirteen pieces, each 0.75" wide.
Does it only fit certain Camry trims?
The catalog lists no trim restriction for this kit. The trim restriction applies to the SG18130 grille accent, which only fits L, LE, XLE, L Hybrid, LE Hybrid, and XLE Hybrid.
Is it stainless steel?
Yes, polished 26-gauge 304 stainless steel made in the USA.
How do I attach thirteen pieces?
Each one has pre-applied 3M acrylic foam tape. Dry-fit everything first using the photos, then press each piece on. QAA states the tape will hold for a lifetime without damaging the paint.
Who can help with fitment?
Quality Automotive Trims, 877-752-3811.
