Product Description
Toyota Camry 2018-2024 Eight-Piece Pillar Post Set (PP18132)
PP18132 is the largest Camry pillar set for model years 2018 through 2024: eight polished stainless covers for the 4-door sedan, listed at $89.99.
What eight means here
Very little is written down. The three Camry pillar listings, PP18130 with four pieces, PP18131 with six and this set with eight, have no notes, no widths and no pillar names. So the further covers in this set aren't described in text anywhere, and we won't describe them by guesswork. The photos show them. Compare this gallery with the six-piece one and note the outlines unique to each. If the shapes found only here are ones you'd like on the car, this is the set to buy. An eight-piece Camry set on its own is the plan; phone 877-752-3811 before combining.
Fit
The fitment row is Toyota Camry, 2018-2024, 4-door, Sedan, without any trim exclusion. Don't mix this up with the grille accent SG18130 on the same sheet, which is tagged "only fits L, LE, XLE, L Hybrid, LE Hybrid, XLE Hybrid"; that restriction is the grille's alone. For a vehicle outside the row, call Quality Automotive Trims at 877-752-3811 with PP18132.
Construction
Each cover is polished 26 gauge 304 stainless steel, made in the USA, with no plated coat. Mounting is 3M automotive-grade acrylic foam tape directly over the existing surface, so there's no drilling and nothing to take off. The Installation tab gives the temperature range and cure time.
Is the biggest set worth it?
That depends entirely on the shapes. If the gallery shows covers you'd like and the smaller sets don't, buying eight now is simpler than reordering later. If you can't spot anything you'd miss, a smaller set saves time on the day.
Companion pieces
The Camry sheet also shows AT18130 (a thirteen-piece body side molding accent at 0.75), LB18130 (an above-plate license bar accent at 1.19), LP18130 (a license plate bezel) and RD18130 (a rear deck accent). Check each one's own listing before ordering it.
Eight covers, step by step
Set aside a relaxed session on a dry, mild day in the shade, ideally with a helper.
Unpack and count eight. Match every cover to the photos and phone before starting about anything bent or missing.
Wash the pillar areas with car soap, rinse and dry thoroughly. Wipe each spot with isopropyl alcohol on a lint-free cloth and let it evaporate. Remove any wax or ceramic coating where tape will sit.
Spread the covers on a soft towel and match them to the photos. Dry-fit each one with its liner on and mark its position with painter's tape, pencilling the spot on the liner so nothing gets shuffled. Only when all eight are mapped should you start peeling. Then work one at a time: liner off, onto the marks, firm pressure from end to end and along both edges. Then work through the rest.
Check the lines from a few paces back after every second cover. If a cover won't settle, leave its liner on and call 877-752-3811. Once cured, wash it along with the car using ordinary soap.
PP18132 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP18132 |
| UPC | 691821394302 |
| Part type | Pillar Post Trim |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2018-2024 Toyota Camry |
Fitment: PP18132
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2018-2024 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2018-2024 Toyota Camry
- PP18130: 4-piece Pillar Post Trim
- PP18131: 6-piece Pillar Post Trim
- LB18130: 1-piece License Bar, Above plate accent Trim
- AT18130: 13-piece Body Side Molding Accent Trim
- SG18130: 1-piece Front Grille Accent Trim
- RD18130: 1-piece Rear Deck Accent
- LP18130: 1-piece License Plate Bezel
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP18132 Pillar Post Trim
What does PP18132 fit?
The 2018-2024 Toyota Camry, 4-door Sedan.
How many covers?
Eight polished 304 stainless steel covers. PP18130 has 4 and PP18131 has 6.
Does the grille accent's trim restriction apply?
No. That tag is on SG18130, not this pillar set.
Which pillars are covered?
The listing doesn't say. Compare the photos or call 877-752-3811.
Is drilling needed?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
