Product Description
Toyota Camry 2018-2026 Rear Bumper Accent, Polished Stainless Strip (RB18130)
RB18130 covers a long run of the Toyota Camry 4-door sedan in QAA's catalog: model years 2018 through 2026. It is a single rear bumper accent in mirror-polished 304 stainless steel, made in the USA, attached with 3M tape.
Nine model years on one record
2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, and 2026, 4-door sedan. The catalog does not split this range, so the same accent is listed across it. If you want someone to double-check your specific car before ordering, the phone number is at the bottom of the page.
Other Camry trim linked here
- MC18130, a two-piece mirror cover set noted as a snap-on replacement set
- DH18130, a four-piece door handle cover kit noted as not including passenger key access or smart key access
- TH18131, a two-piece lower rocker kit noted as installing below the door
- WQ18130, a four-piece wheel well accent kit
Read those notes on each product page before you order. The mirror covers, for example, are a snap-on replacement set rather than an overlay, which is a different kind of install from this bumper accent.
What this piece does
It adheres to the rear bumper cover and runs a polished strip across the back of the sedan. The bumper is not modified.
Material
26-gauge 304 stainless, mirror polished. The finish is the steel itself, so there is no coating to peel.
Mounting
The Camry bumper accent fits over the existing surface with 3M automotive-grade acrylic foam tape. QAA says the tape will hold for a lifetime without causing any harm to the Toyota.
Surface prep on a newer Camry
Many newer cars have had a ceramic coating or paint sealant applied. Those products are designed to repel things, and tape is one of them. Wash and dry the bumper, then wipe the mounting area with a residue-free cleaner. If you know your car carries a coating, ask your detailer how to clear a small area before you install.
Installation
Choose a dry, mild day. Dry-fit the accent with its liner on, using the photos for position. Measure from both ends to the bumper edges and mark the line with masking tape. Peel the liner and press firmly from the middle outward. Skip washing for a few days. Full steps are in the Installation tab.
Care
Mild soap, a rinse, and a soft towel. Avoid abrasive pads.
Centering a single strip
On a sedan's wide rear bumper, a single accent shows any tilt right away. Measure from each end during the dry-fit and adjust the Camry strip until it matches the photos, then confirm it from eye level directly behind the car before peeling the liner.
Why polished stainless
There is no plated skin to wear through, so the mirror face stays consistent with ordinary washing. If you also fit the wheel well or rocker trim, check each of those listings for its finish.
Part details
Camry bumper accent RB18130 has UPC 691821383078; Quality Automotive Trims answers questions at 877-752-3811.
RB18130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB18130 |
| UPC | 691821383078 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2018-2026 Toyota Camry |
Fitment: RB18130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2018-2026 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2018-2026 Toyota Camry
- TH18131: 2-piece Rocker Panel Trim, Lower Kit
- WQ18130: 4-piece Wheel Well Accent Trim
- MC18130: 2-piece Mirror Cover Set
- DH18130: 4-piece Door Handle Cover Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB18130 Rear Bumper Trim Accent
Which Camry does RB18130 fit?
The 4-door Toyota Camry sedan, 2018 through 2026.
How many pieces?
One.
What other trim is linked to this Camry?
MC18130 mirror covers, DH18130 door handle covers, TH18131 rocker trim, and WQ18130 wheel well accents.
Will it stick over a ceramic coating?
Tape needs bare, clean paint. Clear the mounting area of coatings and wax before installing.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface.
