Product Description
Toyota Camry 2018-2026 Rocker Panel Trim, 1.25", Two Pieces (TH18131)
TH18131 is a two-piece polished stainless steel rocker panel trim for the Toyota Camry sedan, covering a long run of model years from 2018 through 2026. Each piece is 1.25" wide, and the note reads "Installs below the door."
A naming mismatch to be aware of
QAA's record calls this part a "Lower Kit." In QAA's rocker panel line, Lower Kits are the type that goes on the doors, from the bottom of the door up. But this listing's note says it installs below the door, which is the wording QAA uses for strips on the rocker panel. The data contradicts itself on location, and we won't pick one. Check the product photos, and call Quality Automotive Trims at 877-752-3811 to confirm where these two pieces go before you order.
Nine model years
Toyota Camry 4-door sedan: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025 and 2026. QAA catalogs other Camry rocker parts for earlier years under different SKUs.
Material and attachment
The two Camry strips are polished 26 gauge 304 stainless steel from the USA, fixed straight over the existing surface with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime and won't damage the sedan.
Two pieces
The record doesn't say where each of the two Camry pieces goes; the photos show it. The listing doesn't state that, so compare the strips in hand with the photos.
Once placement is confirmed
Look at the area where the strips will go and make sure it's smooth for at least 1.25" along the length shown in the photos. Wash, rinse and dry, then wipe with isopropyl alcohol. Mark a straight guide line with painter's tape, hold each strip to it with the liner on, and sight along the car. Peel and press from the front end back in short sections, then press the full length again.
Both strips by the photos
Measure the first strip's position from the front wheel opening and use that number for the second.
When you call
Have your model year handy and say whether you're hoping for steel on the bottom of the doors or on the rocker beneath them. A photo of the lower side of your Camry helps. That's all that's needed to confirm whether TH18131 is the right part.
Supplies
For the Camry: a bucket of soapy water, soft brush, isopropyl alcohol, lint-free cloths, painter's tape and a tape measure.
Timing
Warm, dry weather; about a day before washing, and stay out of deep puddles.
Linked Camry parts
WQ18130 wheel well accents w0.875; RB18130 bumper accent; MC18130 mirror covers, a snap-on replacement set; and DH18130 door handle covers, which do not include passenger key access or smart key access. Check each listing for its finish and notes.
Care
Rinse after salty roads; a gentle soap and a non-abrasive polish keep it bright. Skip scouring pads, which can scratch polished stainless.
Not sure where these strips sit? Call before ordering.
Toyota Camry 2018-2026: two strips, part TH18131, UPC 691821458257, help line 877-752-3811.
TH18131 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH18131 |
| UPC | 691821458257 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.25" |
| Coverage / notes | Installs below the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2018-2026 Toyota Camry |
Fitment: TH18131
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2018-2026 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2018-2026 Toyota Camry
- RB18130: 1-piece Rear Bumper Trim Accent
- WQ18130: 4-piece Wheel Well Accent Trim
- MC18130: 2-piece Mirror Cover Set
- DH18130: 4-piece Door Handle Cover Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH18131 Rocker Panel Trim, Lower Kit
Where does TH18131 go?
The note says below the door, but the part is named a Lower Kit. Call 877-752-3811 to confirm.
Which Camry years fit?
2018 through 2026 sedan.
How wide is it?
1.25".
How many pieces?
Two.
How does it attach?
3M automotive-grade acrylic foam tape over the existing surface.
