Product Description
Toyota Camry 2018-2026 Sedan Stainless Wheel Well Accent Trim WQ18130, 4 Pieces, 0.875" Wide
WQ18130 brings four polished stainless steel Wheel Well Accent Trim pieces, 0.875" wide, to the Toyota Camry 4-door sedan for model years 2018-2026. The listing's wording for the set is "With 3M adhesive installation and black rubber gasket edging".
Years and body
The fitment is a long span: 2018 through 2026, sedan only. The record doesn't split it by trim level. If anything about the arches on your Camry looks different from the photos, check with 877-752-3811 before buying.
What's included
Four 0.875" stainless pieces with black rubber gasket edging along the edge that meets the opening. The record has no corner labels; the photos show which goes where.
Material
On the 2018-2026 Camry, four 0.875" arch strips cut in the USA from polished 26 gauge 304 stainless go on with 3M automotive-grade acrylic foam tape over the existing surface. According to QAA, the tape will hold for a lifetime with no damage to the Toyota.
Before you peel anything
Set aside a clear, dry hour. Start by washing the four openings with car shampoo and a soft mitt and rinse them well. Dry with a clean towel and let the lips drip out. Then do a slow inspection of the band the trim will cover, using a torch at a low angle: you're hunting for wax haze, old adhesive, or a chip whose edge stands proud. Each of those gets treated. The band then gets a wax-and-grease remover pass and, at the last moment, isopropyl alcohol.
Placing each piece
Work from the photos, not from memory. Choose a rear corner to start this time: the rear arch gives a good view of the full curve. Present the piece on its liner, tape both ends down lightly with painter's tape, and walk round to look at it from the front and the side. The gasket should rest along the opening without gaps. Pull the first few centimetres of liner, set the end with your thumb, and carry on in small stages, pressing behind the liner as it goes. Then the opposite rear corner, then the fronts.
Camry group
Four parts are linked: TH18131, a two-piece lower kit at 1.25" that "Installs below the door"; a rear bumper accent; MC18130, a two-piece mirror cover set described as a "Snap on replacement set"; and DH18130, a four-piece door handle cover kit that "Does not include passenger key access, Does not include smart key access". If you fit the rocker strip, put it on before the arches so you can see the lower body together.
Looking after it
Hold off washing for a day. After that, mild soap and a soft cloth, and keep the pressure-washer lance away from the gasket. If a piece doesn't settle along its arch the way the photos show, keep the backing on and phone 877-752-3811.
On arrival, count four 0.875" pieces and check each gasket edge before planning the Camry job.
2018-2026 Camry set WQ18130 has barcode 691821401826. Ring 877-752-3811.
WQ18130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WQ18130 |
| UPC | 691821401826 |
| Part type | Wheel Well Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.875" |
| Edging | Black rubber gasket edging |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2018-2026 Toyota Camry |
Fitment: WQ18130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2018-2026 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2018-2026 Toyota Camry
- TH18131: 2-piece Rocker Panel Trim, Lower Kit
- RB18130: 1-piece Rear Bumper Trim Accent
- MC18130: 2-piece Mirror Cover Set
- DH18130: 4-piece Door Handle Cover Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Wheel Well Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Seat the black rubber gasket edging evenly along the wheel opening as you press the trim on.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WQ18130 Wheel Well Accent Trim
Which Camry years does WQ18130 fit?
2018-2026, Toyota Camry 4-door sedan.
How wide is it?
0.875".
Is rocker trim available?
TH18131, a two-piece 1.25" kit that installs below the door, is linked.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
